Barbara, While not definitive I believe the scope section of the standard describes a few likely devices. I don't have the standard in front of me, but seems I remember seeing it that section. Gary
-----Original Message----- From: Brooks, Barbara [mailto:[email protected]] Sent: Tuesday, September 12, 2000 7:10 AM To: EMC Post Cc: [email protected] Subject: EN 61000-3-3 Does any one have any information regarding how you determine if equipment will not product significant voltage fluctuations or flicker with out performing the tests of EN 61000-3-3 per Paragraph 6.1? EN 61000-3-3 Paragraph 6.1 states "Test shall not be made on equipment which is unlikely to product significant voltage fluctuations or flicker." Barbara Brooks Wyle Laboratories 7800 Highway 20 West Huntsville, AL 35807-7777 (256) 837-4411 ext 595 (253) 721-0144 Fax [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
