2011/8/27 Jon Elson <[email protected]>: > Peter C. Wallace wrote: >> It may in fact be something else (maybe a bad port), as Kirks patch doesnt >> seem to help on viesturs machine and his port acts "funny" reading 0s with >> nothing attached while my test machine reads FFs. I also show 0 trouble with >> the hardware. The ECR reg EPP mode setting stuff _is_ in the 7I43 driver so >> I >> dont really know whats going on at this point. Probably have to try some low >> level poking about >> > Yes, something seemed wrong, as all the registers were reading back 255 > (base 10) which is > not normal. I think Viesturs was fixated on getting the BIOS report to > read right, and that > won't happen. Thus, he was missing the strange behavior of the port itself.
So what can I do now? Peter mentioned some low level poking. How can I do that and what tools do I need for that? And I would appreciate, if any user would share their experience suggestions for EPP-capable PCI add-in card. Viesturs ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
