On 24 May 2013 18:39, Tomaz T. <tomaz_...@hotmail.com> wrote: > Second future was deceleration (for a settable distance) before hitting limit > switch or software limit, so if you are not careful and jog with "high speed" > all the way to the limit, you have no chance to hit limit with that speed and > cause sudden stop and "mechanical" stress to machine...Can be this done with > customization of hal?
LinuxCNC simply won't allow itself to hit the limit switch. If it knows where the limit switch is. (ie, if it is homed) If it doesn't know where the limit switch is, then it has no way to decelerate before hitting it. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Try New Relic Now & We'll Send You this Cool Shirt New Relic is the only SaaS-based application performance monitoring service that delivers powerful full stack analytics. Optimize and monitor your browser, app, & servers with just a few lines of code. Try New Relic and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_may _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
