So assuming I used a 7i48, when does the 3ppwmgen get updated? In the base thread?
On Wed, Oct 12, 2016 at 11:55 AM, Mark <wendt.m...@gmail.com> wrote: > On 10/12/2016 09:54 AM, Gene Heskett wrote: > > You mentioned gedit, which gets my attention. That "thing" has scrambled > > a file for me for the very last time. I don't even install it on a fresh > > install, but nano to avoid remote x problems, and geany for a gedit-like > > editor that has yet to record or miss-record, usually because I am > > typing on a membrane covered keyboard and don't hit the key hard enough. > > > > When I started to make TLM work with a 5i25 card because software > > stepping wasn't fast enough, I had to nuke the .ini and .hal files and > > start from scratch with a fresh run of stepperconf in the first month > > while I was adding this and that to complete the working config. > > About every 9 or 10 times I called up gedit to fix a typu, I would fine > > the files was scrambled by picking up a kilobyte of it and randomly > > inserting it 2 or 3 other places in the file, with the start of the > > insert being mid-line of the inserted section, and inserted mid-line > > where it was inserted. > > > > Save yourself such potential gcodeing headaches by making the default > > editor geany in the axis.ini file. IMO gedit is a TTD, a Textually > > Transmitted Disease. > > You must have something inexplicably incorrect. I've used gedit for > years and never ran into any of the problems you've had with it, running > it either locally or over the network. And that's with a bunch of > plugins installed, both for software development work and for the G Code > editing. > > Mark > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
