I built a new controller for my 9x20 lathe using a 5i25/7i76 combo. I thought I 
had everything working but I still can’t get the spindle working correctly.
I have a 1.5hp PMDC treadmill motor that I am controlling with a Cycletrol-150 
DC controller. The am using the analog out from the 7i76 to replace the 
potentiometer to control the spindle speed. I have a 100 count encoder with 
index (homemade) on the spindle.
The spindle starts under LCNC control but I am not getting an “at speed 
indication” at above 60rpm. 


Sent from my iPad

_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to