Yes it's a bit of a big machine
Hey I'm currently trying to setup your carousel component to control a stepper motor. I can't get it to work. So far Do you have a config that works with that? So just to be clear I'm trying to use your carousel component with a stepper motor and 1 sensor for home I'm missing stuff or there might be bugs I think? As it looks like there are not many People using step direction with your component yet On Sat, 21 Dec 2024, 15:03 andy pugh, <bodge...@gmail.com> wrote: > On Sat, 21 Dec 2024 at 01:54, andrew beck <andrewbeck0...@gmail.com> > wrote: > > > > The issue is there is a extra arm that I want to add into tool prepare > > cycle. And that involves moving a axis. > > That's unusual, all the ones that I have seen need the working tool to > have moved to the tool change position before they can operate. > > But the arm isn't a real axis, so you should be able to move it with > just HAL (limit3 etc). > > But have a look at "extrajoints", which Dewey describes around post 20 > here: > https://forum.linuxcnc.org/38-general-linuxcnc-questions/35643-making-some-axes-independent-of-the-motion-controller?start=0 > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1912 > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
