----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Bob, I use the RMS Flightsoft planning software, and I never have been able to figure out the weight and balance portion of the program. What program are you using? Ken Doyle Springfield, Mo > [Original Message] > From: <[EMAIL PROTECTED]> > To: <[email protected]> > Date: 11/4/2003 9:35:03 PM > Subject: [COUPERS-TECH] Re: Digest list: Ercoupe Technical Discussion (moderated) > > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > > > Needs some help > Does anyone happen to know the correct arm and moment for the Alon A2 header tanks and the two wing tanks? Iam trying to setup the weight and balance in a new flight planning program and the info that I have in my Owners Manual doesn't make sense as it doesn't seperate the fuslege and the wing tanks. The header tank is forward of the CG and the wing tanks are , I believe , behind the CG . My OM lumps all tanks together (24 gal) rather then three entrys one for each tank , which I believe gives an incorrect Weight & Balance result. Any help would be aprecitated > Bob Bullock > N5621F > Maryland > ========================================================================== == == > To leave this forum go to: http://ercoupers.com/lists.htm > Search the archives on http://escribe.com/aviation/coupers-tech/ > > ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
