On 4/26/2010 11:12 PM, Caliendo Dan wrote:
> It never stops in the same place twice ??
Unless the engine has a lot of excess friction, it should always stop
half way between TDC on one piston and the next one in the firing order.
It doesn't matter which piston(s) we are talking about, all 4 such
positions look the same. The only difference is which prop blade is in
a given position. (Even fixed pitch props have a #1 blade, but it is
not of much value to know which is which.) If yours does not
consistently and the cylinders are not brand new (high friction) I'd
want to know why!
--
John Cooper
Skyport East
www.skyportservices.net
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ercoupe-tech/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ercoupe-tech/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
