Just change the autopilot back to the "generic" version in the *-set.xml file. This was answered within the last couple of weeks but maybe it was someone else asking the same question.
Best, Jim Seamus Thomas Carroll said: > I went out of town for a coulple of weeks and looking through my list of > emails i dont think a recieved a response to the question below. I would > like the cesna to be able to follow a set of waypoints but due to the new > autopilot this no longer seems to be a possiblity. > > Any thoughts on how i would be able to achieve this functionality? > > Seamus > > On Wed, 5 May 2004, Seamus Thomas Carroll wrote: > > > Are there plans to add a route manager to the KAP140? If not what > > property do I change to use the generic autopilot? I have tried different > > changing values in different xml files but with no success. > > > > Seamus > > > > On Wed, 5 May 2004, Roy Vegard Ovesen wrote: > > > > > On Wednesday 05 May 2004 06:17, Seamus Thomas Carroll wrote: > > > > To test if a problem resides with the cesna autopilot i tested > > > > using "Add Waypoint" and instead of the autopilot guiding the plane to the > > > > waypoint it just flys in cirlces until it spirals into the ground. > > > > This autopilot with the cesna did work correctly that last time I tried > > > > it a couple of weeks ago. Has someone changed cesna autopilot config file > > > > to cause this incorrect behaviour? > > > > > > The default Cessna (--aircraft=c172-3d and c172-2dpanel) have changed > > > autopilot from the generic to a KAP140 autopilot. A new instrument has been > > > added to the cockpit and this should be visible below the ADF radio. The > > > KAP140 does not have a route manager so consequently you can not define a > > > route for it to fly. For instructions on how to operate the KAP140 you should > > > download the Pilot Guide from the Bendix/King website. > > > > > > > > > > Is it a problem with the set up on my > > > > end? > > > > > > You can of course edit your *set.xml file to change the autopilot back to the > > > generic. > > > > > > > > > -- > > > Roy Vegard Ovesen > > > > > > > > > _______________________________________________ > > > Flightgear-devel mailing list > > > [EMAIL PROTECTED] > > > http://mail.flightgear.org/mailman/listinfo/flightgear-devel > > > > > > > > > > _______________________________________________ > Flightgear-devel mailing list > [EMAIL PROTECTED] > http://mail.flightgear.org/mailman/listinfo/flightgear-devel > -- Jim Wilson - IT Manager Kelco Industries PO Box 160 58 Main Street Milbridge, ME 04658 207-546-7989 - FAX 207-546-2791 http://www.kelcomaine.com _______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel