Dear David,
I have indeed double checked that the pin (and associated via) is connected to the
proper net. Who do you have that looks at possible bugs? I would be more than happy
to send the file to someone else to have a look at this problem.
Many thanks for your input on the first problem, which is now resolved.
Cheers,
Bruce
>On another note, and in the same design, I have manually swapped power pins on
a >component. One of the power pins should be connected to an internal plane,
but it will >not connect properly (no thermal relief, copper pours around the
via). All of the power >pins in the vicinity of this via connect properly,
however, nothing I do seems to work to >get this via to connect. Any thoughts
on this one?
Weird. Did you double-click on that power pin (in the PCB editor) and make sure
it had the correct net ? This sounds like something you need to show to one of
the people that have volunteered to look at possible bugs.
--
David Cary
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Bruce Williams, CET, CNE
Electronic Substrate Systems Inc.
Ph: (403) 251-7377
FAX: (403) 255-6132
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
