"I have configured my linux box on mode 0"

Wouldn't you need to use mode 4?

802.3ad or 4

                IEEE 802.3ad Dynamic link aggregation.  Creates
                aggregation groups that share the same speed and
                duplex settings.  Utilizes all slaves in the active
                aggregator according to the 802.3ad specification.



On Thu, Mar 27, 2014 at 10:44 AM, Rupesh Basnet <[email protected]>wrote:

> Hi All,
>
> I have been trying LACP between Foundry and Linux machine since some days
> but not able to figure out the issue and resolve the issue. I didn't see
> much configurations thats needs to be done on foundry. I have configured my
> linux box on mode 0 and bonding seems to be up but still I am not able to
> pass traffic through it.
>
> Serveriron Configurations:
>
> interface ethernet 4/2
>  port-name **LACP-with-Linux***
>  no spanning-tree
>  link-aggregate active
> !
> interface ethernet 4/3
>  port-name **LACP-with-Linux***
>  no spanning-tree
>  link-aggregate active
> !
>
>
> SI#show version
>   SW: Version 09.3.00eTD4 Copyright (c) 1996-2003 Foundry Networks, Inc.
>       Compiled on Jun 28 2005 at 18:57:32 labeled as WXR09300e
>   HW: ServerIronGT E-2 Router, SYSIF version 21, Serial #: Non-exist
> ==========================================================================
> SL 1: B0GMR WSM2 Management Module, SYSIF 2, M6, ACTIVE
>       Serial #:   CH39040033
>     0 MB SHM, 2 Application Processors
> 16384 KB BRAM, SMC version 1, BM version 21
>   SW: (1)09.3.00eTF2 (2)09.3.00eTF2
> ==========================================================================
> SL 4: J-BxGC16 JetCore Gig Copper Module, SYSIF 2
>       Serial #:   CH33060779
>  4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 12, version 0449
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 13, version 0449
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 14, version 0449
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 15, version 0449
>
>
> SI#show link-aggregate
> System ID: 000c.db5d.b066
> Long  timeout: 90, default: 90
> Short timeout: 3, default: 3
> Port  [Sys P] [Port P] [ Key ] [Act][Tio][Agg][Syn][Col][Dis]
> [Def][Exp][Ope]
> 4/2        1        1     483   Yes   S   Agg  Syn  Col  Dis  Def No   Ope
> 4/3        1        1     483   Yes   S   Agg  Syn  Col  Dis  Def No   Ope
>
>
> Status of linux machine:
> MII Status: up
> MII Polling Interval (ms): 30000
> Up Delay (ms): 0
> Down Delay (ms): 0
>
> Slave Interface: eth0
> MII Status: up
> Speed: 1000 Mbps
> Duplex: full
> Link Failure Count: 0
> Permanent HW addr: 00:e0:ed:2b:a1:99
> Slave queue ID: 0
>
> Slave Interface: eth1
> MII Status: up
> Speed: 1000 Mbps
> Duplex: full
> Link Failure Count: 0
> Permanent HW addr: 00:e0:ed:2b:a1:98
> Slave queue ID: 0
>
> --
> Regards,
> --------
> Rupesh Basnet
>
> _______________________________________________
> foundry-nsp mailing list
> [email protected]
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp

Reply via email to