Hi George, First I tried mode 4(802.3ad) at first but LACP didn't formed at all.
Regards, -------- Rupesh Basnet On 03/28/2014 12:09 AM, George B. wrote:
"I have configured my linux box on mode 0" Wouldn't you need to use mode 4? 802.3ad or 4 IEEE 802.3ad Dynamic link aggregation. Creates aggregation groups that share the same speed and duplex settings. Utilizes all slaves in the active aggregator according to the 802.3ad specification.On Thu, Mar 27, 2014 at 10:44 AM, Rupesh Basnet <[email protected] <mailto:[email protected]>> wrote:Hi All, I have been trying LACP between Foundry and Linux machine since some days but not able to figure out the issue and resolve the issue. I didn't see much configurations thats needs to be done on foundry. I have configured my linux box on mode 0 and bonding seems to be up but still I am not able to pass traffic through it. Serveriron Configurations: interface ethernet 4/2 port-name **LACP-with-Linux*** no spanning-tree link-aggregate active ! interface ethernet 4/3 port-name **LACP-with-Linux*** no spanning-tree link-aggregate active ! SI#show version SW: Version 09.3.00eTD4 Copyright (c) 1996-2003 Foundry Networks, Inc. Compiled on Jun 28 2005 at 18:57:32 labeled as WXR09300e HW: ServerIronGT E-2 Router, SYSIF version 21, Serial #: Non-exist ========================================================================== SL 1: B0GMR WSM2 Management Module, SYSIF 2, M6, ACTIVE Serial #: CH39040033 0 MB SHM, 2 Application Processors 16384 KB BRAM, SMC version 1, BM version 21 SW: (1)09.3.00eTF2 (2)09.3.00eTF2 ========================================================================== SL 4: J-BxGC16 JetCore Gig Copper Module, SYSIF 2 Serial #: CH33060779 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a 32768 KB PRAM and 2M-Bit*1 CAM for IGC 12, version 0449 32768 KB PRAM and 2M-Bit*1 CAM for IGC 13, version 0449 32768 KB PRAM and 2M-Bit*1 CAM for IGC 14, version 0449 32768 KB PRAM and 2M-Bit*1 CAM for IGC 15, version 0449 SI#show link-aggregate System ID: 000c.db5d.b066 Long timeout: 90, default: 90 Short timeout: 3, default: 3 Port [Sys P] [Port P] [ Key ] [Act][Tio][Agg][Syn][Col][Dis][Def][Exp][Ope] 4/2 1 1 483 Yes S Agg Syn Col Dis Def No Ope 4/3 1 1 483 Yes S Agg Syn Col Dis Def No Ope Status of linux machine: MII Status: up MII Polling Interval (ms): 30000 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth0 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:e0:ed:2b:a1:99 Slave queue ID: 0 Slave Interface: eth1 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:e0:ed:2b:a1:98 Slave queue ID: 0-- Regards,-------- Rupesh Basnet _______________________________________________ foundry-nsp mailing list [email protected] <mailto:[email protected]> http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
