Hi Rupesh, According to your post which is only one side I can assume the following.
> Trunk ID: 98 > Type: Switch > Duplex: Full > Speed: 1G > Tag: No > Priority: level0 > Active Ports: 2 This looks fine to me (Speed = Port Speed) > Ports 4/3 4/4 > Link_Status active active LACP Information is missing. What is your linux doing now (cat /proc/net/bonding/bond0) ? > Load Sharing > Mac Address 1 0 Only one mac is visible. I guess you should switch to mode 4 and adjust the lacp timers like George said. Be careful and read your man pages carefully, cause linux distros are likely to change their syntax after a dist upgrade. Please bare in mind the limits of ethernet interface bonding in general (unknown, multicast and unicast hashing). Regards Erich _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
