Hi Rupesh, I guess you hit the hardware limits when you try to build the primary port 4/2 on this "old" foundry device.
<snip> Each trunk group must start with a primary port. The primary port is always the lowest number in the port range. For example, trunk groups on a Chassis device can have the following primary ports: 2-port trunk groups: 1, 3, 5, 7, 9, 11,13, 15, 17, 19, 21, 23 </snip> Also you can choose the the trunk type switch (default) or server which influence the hash algorithm for the balancing. See below: http://www.foundrynet.com/services/documentation/sribcg/current/Trunking.html Regards Erich Am 27.03.14 18:44, schrieb Rupesh Basnet: > Hi All, > > I have been trying LACP between Foundry and Linux machine since some > days but not able to figure out the issue and resolve the issue. I > didn't see much configurations thats needs to be done on foundry. I have > configured my linux box on mode 0 and bonding seems to be up but still I > am not able to pass traffic through it. > > Serveriron Configurations: > > interface ethernet 4/2 > port-name **LACP-with-Linux*** > no spanning-tree > link-aggregate active > ! > interface ethernet 4/3 > port-name **LACP-with-Linux*** > no spanning-tree > link-aggregate active > ! > > > SI#show version > SW: Version 09.3.00eTD4 Copyright (c) 1996-2003 Foundry Networks, Inc. > Compiled on Jun 28 2005 at 18:57:32 labeled as WXR09300e > HW: ServerIronGT E-2 Router, SYSIF version 21, Serial #: Non-exist > ========================================================================== > SL 1: B0GMR WSM2 Management Module, SYSIF 2, M6, ACTIVE > Serial #: CH39040033 > 0 MB SHM, 2 Application Processors > 16384 KB BRAM, SMC version 1, BM version 21 > SW: (1)09.3.00eTF2 (2)09.3.00eTF2 > ========================================================================== > SL 4: J-BxGC16 JetCore Gig Copper Module, SYSIF 2 > Serial #: CH33060779 > 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a > 32768 KB PRAM and 2M-Bit*1 CAM for IGC 12, version 0449 > 32768 KB PRAM and 2M-Bit*1 CAM for IGC 13, version 0449 > 32768 KB PRAM and 2M-Bit*1 CAM for IGC 14, version 0449 > 32768 KB PRAM and 2M-Bit*1 CAM for IGC 15, version 0449 > > > SI#show link-aggregate > System ID: 000c.db5d.b066 > Long timeout: 90, default: 90 > Short timeout: 3, default: 3 > Port [Sys P] [Port P] [ Key ] > [Act][Tio][Agg][Syn][Col][Dis][Def][Exp][Ope] > 4/2 1 1 483 Yes S Agg Syn Col Dis Def No Ope > 4/3 1 1 483 Yes S Agg Syn Col Dis Def No Ope > > > Status of linux machine: > MII Status: up > MII Polling Interval (ms): 30000 > Up Delay (ms): 0 > Down Delay (ms): 0 > > Slave Interface: eth0 > MII Status: up > Speed: 1000 Mbps > Duplex: full > Link Failure Count: 0 > Permanent HW addr: 00:e0:ed:2b:a1:99 > Slave queue ID: 0 > > Slave Interface: eth1 > MII Status: up > Speed: 1000 Mbps > Duplex: full > Link Failure Count: 0 > Permanent HW addr: 00:e0:ed:2b:a1:98 > Slave queue ID: 0 > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
