gmsh  

Messages by Thread

• Re: [Gmsh] Strange meshing behaviour Christophe Geuzaine
  • Re: [Gmsh] Strange meshing behaviour Christophe Geuzaine
• [Gmsh] The Control of OCC BSpline points on the intersection edge Jun Fang
  • Re: [Gmsh] The Control of OCC BSpline points on the intersection edge Christophe Geuzaine
  • Re: [Gmsh] The Control of OCC BSpline points on the intersection edge Jun Fang
• [Gmsh] Using OpenCASCADE Boolean to create transfinite surfaces (Boundary) which maintain Transfinite mesh William Logie
  • Re: [Gmsh] Using OpenCASCADE Boolean to create transfinite surfaces (Boundary) which maintain Transfinite mesh Christophe Geuzaine
• [Gmsh] Help with surface visibility Andress
  • [Gmsh] Help with surface visibility Andress
  • Re: [Gmsh] Help with surface visibility Christophe Geuzaine
  • Re: [Gmsh] Help with surface visibility Andress
  • Re: [Gmsh] Help with surface visibility Christophe Geuzaine
• Re: [Gmsh] R: R: Slice 3D to get 2D geometry Don Van Kerkhoven
  • [Gmsh] R: R: R: Slice 3D to get 2D geometry Vicini Alessandro
  • Re: [Gmsh] Slice 3D to get 2D geometry Christophe Geuzaine
• Re: [Gmsh] R: Slice 3D to get 2D geometry Don Van Kerkhoven
  • [Gmsh] R: R: Slice 3D to get 2D geometry Vicini Alessandro
  • [Gmsh] R: Slice 3D to get 2D geometry Vicini Alessandro
  • Re: [Gmsh] R: Slice 3D to get 2D geometry Jeremy Theler
  • [Gmsh] R: R: Slice 3D to get 2D geometry Vicini Alessandro
• [Gmsh] Slice 3D to get 2D geometry Sabrina Zacarias
  • Re: [Gmsh] Slice 3D to get 2D geometry Christophe Geuzaine
  • [Gmsh] R: Slice 3D to get 2D geometry Vicini Alessandro
• [Gmsh] Sphere in a sphere mesh Silvia Ceccacci (HDR)
  • Re: [Gmsh] Sphere in a sphere mesh Jeremy Theler
  • Re: [Gmsh] Sphere in a sphere mesh Christophe Geuzaine
• [Gmsh] Remeshing for STL Li Yang
  • Re: [Gmsh] Remeshing for STL Jean-François Remacle
• [Gmsh] Connecting structured to unstructured meshed volumes in 3D Octavio Castillo Reyes
  • Re: [Gmsh] Connecting structured to unstructured meshed volumes in 3D Christophe Geuzaine
  • Re: [Gmsh] Connecting structured to unstructured meshed volumes in 3D Octavio Castillo Reyes
  • Re: [Gmsh] Connecting structured to unstructured meshed volumes in 3D Christophe Geuzaine
  • Re: [Gmsh] Connecting structured to unstructured meshed volumes in 3D Octavio Castillo Reyes
  • Re: [Gmsh] Connecting structured to unstructured meshed volumes in 3D Christophe Geuzaine
  • Re: [Gmsh] Connecting structured to unstructured meshed volumes in 3D Octavio Castillo Reyes
  • Re: [Gmsh] Connecting structured to unstructured meshed volumes in 3D Christophe Geuzaine
  • Re: [Gmsh] Connecting structured to unstructured meshed volumes in 3D Octavio Castillo Reyes
• [Gmsh] Slivers generated by GMSH Grunwald, Christoph
  • Re: [Gmsh] Slivers generated by GMSH Christophe Geuzaine
  • Re: [Gmsh] Slivers generated by GMSH Christophe Geuzaine
• [Gmsh] geo script - how to reference elements after reading a msh file Don Van Kerkhoven
  • Re: [Gmsh] geo script - how to reference elements after reading a msh file Christophe Geuzaine
  • Re: [Gmsh] geo script - how to reference elements after reading a msh file Don Van Kerkhoven
• Re: [Gmsh] Linear elasticity equation using the template project file Christophe Geuzaine
  • Re: [Gmsh] Linear elasticity equation using the template project file Zoltan
• [Gmsh] saving GMSH mesh into a CAD file format like STEP Louise Olsen
  • Re: [Gmsh] saving GMSH mesh into a CAD file format like STEP DILASSER Guillaume
  • Re: [Gmsh] saving GMSH mesh into a CAD file format like STEP Louise Olsen
  • Re: [Gmsh] saving GMSH mesh into a CAD file format like STEP Christophe Geuzaine
  • Re: [Gmsh] saving GMSH mesh into a CAD file format like STEP Frederic Dubois
• [Gmsh] Selecting faces after boolean operation Francis Giraldeau
  • Re: [Gmsh] Selecting faces after boolean operation Christophe Geuzaine
  • Re: [Gmsh] Selecting faces after boolean operation Francis Giraldeau
  • Re: [Gmsh] Selecting faces after boolean operation Christophe Geuzaine
• [Gmsh] gmsh python module Francis Giraldeau
  • Re: [Gmsh] gmsh python module Christophe Geuzaine
• Re: [Gmsh] Strange mesh in a curved square Don Van Kerkhoven
• [Gmsh] geo script - how to get a mesh after plugin(triangulate) ? Don Van Kerkhoven
  • Re: [Gmsh] geo script - how to get a mesh after plugin(triangulate) ? Christophe Geuzaine
  • Re: [Gmsh] geo script - how to get a mesh after plugin(triangulate) ? Don Van Kerkhoven
• Re: [Gmsh] Issue with periodicities Christophe Geuzaine
• [Gmsh] What is the angle in ClassifySurfaces? Baltasar Rüchardt
  • Re: [Gmsh] What is the angle in ClassifySurfaces? Christophe Geuzaine
• [Gmsh] Small cylinder in huge domain tao song
  • Re: [Gmsh] Small cylinder in huge domain Christophe Geuzaine
  • Re: [Gmsh] Small cylinder in huge domain tao song
  • Re: [Gmsh] Small cylinder in huge domain jeremy theler
  • Re: [Gmsh] Small cylinder in huge domain tao song
• [Gmsh] Clarification on Element Physical Group Relation Xavier Johnson
  • Re: [Gmsh] Clarification on Element Physical Group Relation DILASSER Guillaume
• [Gmsh] Gmsh OCC class Physical Groups Rinaldi Polese Petrolli
  • Re: [Gmsh] Gmsh OCC class Physical Groups Rinaldi Polese Petrolli
• Re: [Gmsh] negative z values in version 4.3.0 Christophe Geuzaine
  • Re: [Gmsh] negative z values in version 4.3.0 Komal Kumari
  • Re: [Gmsh] negative z values in version 4.3.0 Christophe Geuzaine
• [Gmsh] Enquiry: making a stl file Rioual Francois
  • Re: [Gmsh] Enquiry: making a stl file Christophe Geuzaine
• [Gmsh] cannot change the meshing size Zhang, Fangyin
  • Re: [Gmsh] cannot change the meshing size Christophe Geuzaine
  • Re: [Gmsh] cannot change the meshing size Zhang, Fangyin
  • Re: [Gmsh] cannot change the meshing size Zhang, Fangyin
• [Gmsh] Geo scripts : syntax PointsOf for a Curve Loop Don Van Kerkhoven
  • Re: [Gmsh] Geo scripts : syntax PointsOf for a Curve Loop Christophe Geuzaine
  • Re: [Gmsh] Geo scripts : syntax PointsOf for a Curve Loop Don Van Kerkhoven
• [Gmsh] GmshToFoam Error Nick Barra
  • Re: [Gmsh] GmshToFoam Error Max Orok
• [Gmsh] Adding a physical surface (on which the load will be applied) to an existing volume. Vincent Libertiaux
  • Re: [Gmsh] Adding a physical surface (on which the load will be applied) to an existing volume. Bertrand Thierry
  • Re: [Gmsh] Adding a physical surface (on which the load will be applied) to an existing volume. Vincent Libertiaux
• [Gmsh] Error: No tetrahedra in region X Nick Barra
• [Gmsh] Problem with "Compound functions" Adel MORENO
  • Re: [Gmsh] Problem with "Compound functions" Christophe Geuzaine
• [Gmsh] Broken mesh for coarser mesh size at centre of circle Rohracker, Maurice
• Re: [Gmsh] Create mesh for 1D geometry Deepa
  • Re: [Gmsh] Create mesh for 1D geometry Jeremy Theler
  • Re: [Gmsh] Create mesh for 1D geometry Max Orok
  • Re: [Gmsh] Create mesh for 1D geometry Deepa
  • Re: [Gmsh] Create mesh for 1D geometry Max Orok
  • Re: [Gmsh] Create mesh for 1D geometry Deepa
• [Gmsh] Questions about gmsh Li Yang
  • Re: [Gmsh] Questions about gmsh David Colignon
  • Re: [Gmsh] Questions about gmsh Li Yang
  • Re: [Gmsh] Questions about gmsh Jean-François Remacle
  • Re: [Gmsh] Questions about gmsh DILASSER Guillaume
  • [Gmsh] Questions about gmsh Li Yang
  • Re: [Gmsh] Questions about gmsh Christophe Geuzaine
• [Gmsh] Physical entities/groups Jeremy Theler
  • Re: [Gmsh] Physical entities/groups cgeuzaine
• [Gmsh] Perodic surface command does not find connections on the opposite surface Grunwald, Christoph
  • Re: [Gmsh] Perodic surface command does not find connections on the opposite surface Christophe Geuzaine
• [Gmsh] HXT failure at the boolean demo with baffles andrew
  • Re: [Gmsh] HXT failure at the boolean demo with baffles Christophe Geuzaine
• Re: [Gmsh] Line / edge / curve direction - how to change it to use Progression properly (transfinite curve) Christophe Geuzaine
• Re: [Gmsh] Structured triangular grid Christophe Geuzaine
• [Gmsh] Problems with compounded curves and surfaces Pouria
  • Re: [Gmsh] Problems with compounded curves and surfaces Christophe Geuzaine
• [Gmsh] Duplicate elements in unv file Pollyana Rosa
  • Re: [Gmsh] Duplicate elements in unv file Christophe Geuzaine
• [Gmsh] Periodicity at the boundary of a box Rohracker, Maurice
  • Re: [Gmsh] Periodicity at the boundary of a box Christophe Geuzaine
• [Gmsh] Problem with 4.5.1 Vicini Alessandro
• [Gmsh] Structured surface meshes and export to XYZ or structured CGNS Guillaume Florent
  • Re: [Gmsh] Structured surface meshes and export to XYZ or structured CGNS Christophe Geuzaine
  • Re: [Gmsh] Structured surface meshes and export to XYZ or structured CGNS Guillaume Florent
• [Gmsh] Hextreme into Gmsh Guillaume Florent
  • Re: [Gmsh] Hextreme into Gmsh Christophe Geuzaine
• [Gmsh] Transforming mesh Max Orok
  • Re: [Gmsh] Transforming mesh jeremy theler
  • Re: [Gmsh] Transforming mesh Max Orok
  • Re: [Gmsh] Transforming mesh Christophe Geuzaine
  • Re: [Gmsh] Transforming mesh Max Orok
  • Re: [Gmsh] Transforming mesh Christophe Geuzaine
  • Re: [Gmsh] Transforming mesh Max Orok
• [Gmsh] Structured mesh for a 5-vertices polygon Pollyana Rosa
  • Re: [Gmsh] Structured mesh for a 5-vertices polygon Christophe Geuzaine
• [Gmsh] Creating 3D geometry Deepa
  • Re: [Gmsh] Creating 3D geometry Max Orok
  • Re: [Gmsh] Creating 3D geometry Max Orok
• Re: [Gmsh] Meshing constraint in interphase section of RVEs DILASSER Guillaume
• [Gmsh] Cmake configuration problem with gmsh 4.5.1 walter steffe
  • Re: [Gmsh] Cmake configuration problem with gmsh 4.5.1 Christophe Geuzaine
  • Re: [Gmsh] Cmake configuration problem with gmsh 4.5.1 walter steffe
• [Gmsh] BooleanUnion and then PhysicalVolume of the components Salazar De Troya, Miguel
  • Re: [Gmsh] BooleanUnion and then PhysicalVolume of the components Christophe Geuzaine
• [Gmsh] strange behavior of layer extrusion Marco Antolovic
  • Re: [Gmsh] strange behavior of layer extrusion Christophe Geuzaine
  • Re: [Gmsh] strange behavior of layer extrusion Marco Antolovic
• [Gmsh] Creating surface mesh from super-ellipse points Orxan Shibliyev
• [Gmsh] Problem with mesh creation from a brep geometry andrew
  • Re: [Gmsh] Problem with mesh creation from a brep geometry Christophe Geuzaine
  • Re: [Gmsh] Problem with mesh creation from a brep geometry andrew
• [Gmsh] transfer physical groups to patches in version 4.3.0 Marc Belleau
  • Re: [Gmsh] transfer physical groups to patches in version 4.3.0 jeremy theler
  • Re: [Gmsh] transfer physical groups to patches in version 4.3.0 Marc Belleau
  • Re: [Gmsh] transfer physical groups to patches in version 4.3.0 Christophe Geuzaine
  • Re: [Gmsh] transfer physical groups to patches in version 4.3.0 Marc Belleau
• [Gmsh] Plane definition issue Sanghavi, Chaitanya
  • Re: [Gmsh] Plane definition issue Christophe Geuzaine
• [Gmsh] Problem with 2D plots JP Moitinho de Almeida
  • Re: [Gmsh] Problem with 2D plots Christophe Geuzaine
  • Re: [Gmsh] Problem with 2D plots JP Moitinho de Almeida
• [Gmsh] Unhandled element 1 at line ... (higher order element issue?) while converting mesh gmshToFoam sourav . mandal
  • Re: [Gmsh] Unhandled element 1 at line ... (higher order element issue?) while converting mesh gmshToFoam Christophe Geuzaine
• [Gmsh] Laplace and relocate optimizations Jeremy Theler
  • Re: [Gmsh] Laplace and relocate optimizations Christophe Geuzaine
• [Gmsh] Getting the opencascade version from python Jeremy Theler
  • Re: [Gmsh] Getting the opencascade version from python Christophe Geuzaine
• [Gmsh] Python scripts as onelab solvers Max Orok
  • Re: [Gmsh] Python scripts as onelab solvers Christophe Geuzaine
  • Re: [Gmsh] Python scripts as onelab solvers Max Orok
• [Gmsh] Change position of value scale Marco Tiberga
  • Re: [Gmsh] Change position of value scale Max Orok
  • Re: [Gmsh] Change position of value scale Marco Tiberga
  • Re: [Gmsh] Change position of value scale Christophe Geuzaine
  • Re: [Gmsh] Change position of value scale Marco Tiberga
• [Gmsh] Refinement mesh of specific entities within volume Sabrina Zacarias
  • Re: [Gmsh] Refinement mesh of specific entities within volume Jeremy Theler
• [Gmsh] question about python api Frederic Dubois
  • Re: [Gmsh] question about python api Christophe Geuzaine
  • Re: [Gmsh] question about python api Frederic Dubois
  • Re: [Gmsh] question about python api Christophe Geuzaine
  • Re: [Gmsh] question about python api Frederic Dubois
  • Re: [Gmsh] question about python api Christophe Geuzaine
  • Re: [Gmsh] question about python api Frederic Dubois
  • Re: [Gmsh] question about python api cgeuzaine
  • Re: [Gmsh] question about python api Christophe Geuzaine
  • Re: [Gmsh] question about python api Frederic Dubois
• [Gmsh] getMeshElementByCoord in API MA Ariza-Gracia
  • Re: [Gmsh] getMeshElementByCoord in API Christophe Geuzaine
• [Gmsh] how / vector arrow fixed size, just color should be different Vladimir Nikolic
  • Re: [Gmsh] how / vector arrow fixed size, just color should be different Vladimir Nikolic
• [Gmsh] Robustness for quadratic meshes Sanghavi, Chaitanya
  • Re: [Gmsh] Robustness for quadratic meshes Christophe Geuzaine
• [Gmsh] Local refinement via embedded points Ryan Huechteman
  • Re: [Gmsh] Local refinement via embedded points Christophe Geuzaine
• [Gmsh] Bad gemetry normandajc
  • Re: [Gmsh] Bad gemetry Christophe Geuzaine
• [Gmsh] Regular mesh only composed by tetrahedra Francisco Pena
  • Re: [Gmsh] Regular mesh only composed by tetrahedra Christophe Geuzaine
  • Re: [Gmsh] Regular mesh only composed by tetrahedra Francisco Pena

• Earlier messages
• Later messages