Bob, definitely no sign of any yamahabond...
-----Original Message-----
From: Bob J. [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 28, 2002 12:25 PM
To: [EMAIL PROTECTED]
Subject: Re: Dealer doldrums & valve clearances (longish)
Joe;
My experience has been that if they remove the cams and have to swap
out
some shims then it could run 300. A little high but not way out of line.
300 is high if they didnt have to pull the cams and if they havent done a
GTS
before it probably took them at least 1 hr to remove and replace the
bodywork. I would wonder if they did actually take the valve cover off.
Can
you tell if there is any new yamahabond squished out around the gasket?
Bob
======================================================================================
NOTICE - This communication may contain confidential and privileged information that
is for the sole use of the intended recipient. Any viewing, copying or distribution
of, or reliance on this message by unintended recipients is strictly prohibited. If
you have received this message in error, please notify us immediately by replying to
the message and deleting it from your computer.
==============================================================================
