There are a lot of papers on acoustic properties of tubes/cones/etc. and  
the best way to determine a lot of this is with fancy integration using  
multivariable calculus. 
 
Much like a falling body has independent parameters (drop a bullet while  
firing one from a gun and they hit the ground at the same time) - the same 
with  acoustic properties in a pipe.
 
Now, the frequency of any standing wave is always derived by the length of  
the tube only. This is the same if it is a cone or curve or ess or any 
shape  imaginable (that doesn't have a hole in it except at the end). This is  
determined simply because frequency is a product of wavelength and time, and  
wavelength is only effected by how long the standing wave is. The standing 
wave  will be the same wavelength whether it's a cone, tube, pear, whatever. 
 
What does change is the acoustic pressure - and this could possibly cause  
feedback on your lips that you could very well notice. Generally, acoustic  
pressure lessens as the tube gets wider - so it is inversely proportional to 
the  width of the pipe. 
 
Now direction could have something to do with it in a curved pipe, but  
recall that if you take a garden hose of specific length, it's fundamental is  
the same no matter what shape you bend it. One can find out through 
integration  that this is so. 
 
But what you have to remember is that if a pipe or loop of tubing is  
sitting and not doing anything it has a standing fundamental and a harmonic  
series - and it is measurable and does not change. That tube is going to have 
an 
 in tune harmonic series (in tune with itself) and will have 2^n harmonics 
where  they will match equal temperament (due to the octave ratio of 2:1).
 
Where the difference comes in is our ability to match the frequency of our  
lips. Our lips when buzzing create many overtones and extra frequencies 
mixed in  and when we go higher or lower we are missing the harmonic of the 
instrument.  Thus, when we buzz as clearly as we can to match the natural 
harmonic we will  get the purest tone we can get. 
 
The only way the partials could possibly shift is changing it from an open  
pipe to a closed pipe (and we do that by sticking our hand in the bell). 
This is  also why stopping the horn really changes the fundamental harmonic 
series of the  horn - and why putting our hand in the bell somewhat gives it 
that 'notchiness'  we need in the high range.
 
As for changes in diameter - it cannot effect the harmonic series unless  
you interfere with the length of the tubing or close it off so that the 
standing  wave is returned. 
 
There will be a difference between playing it (subjective to lip pressure,  
person, etc.) and sticking an inducted frequency into the pipe to check the 
 response/resonance with an oscilloscope. People aren't accurate, machines 
are -  and so I'd trust a machine in these matters.
 
Per the C2 (I assume you mean 2nd space bass clef), it's going to be  
perfect on the F side open, and on Bb side with 1 and 3 you're really taking a  
second partial with a combination fingering and I see no other way that that  
could be anything but slightly sharp due to the combination fingering - 
UNLESS  it's a compensating horn - then it would be in tune because it 
compensates for  the combination.
 
As for thinking too much - this really isn't that complicated and is  
covered in the first semester of college level Physics. To me, knowing this 
sort  
of thing isn't making things complicated - it's greatly simplifying them. 
Maybe  that's where our perspectives differ.
 
By the way, as for A being universal - even if you were to change A to  
something strange like 400 or 500Hz, then the rest of the note frequencies are  
easily calculate able such that one could still tune to an F and an E  or 
whatever you want and it would work fine (equal temperament) - I  have an 
excel spreadsheet which can do that as well as compute harmonics and  pitch 
tendencies.
 
-William
 
 
In a message dated 11/19/2009 2:02:39 P.M. Eastern Standard Time,  
[email protected] writes:

William,  the theory is just valid for 1005 normal circumstances, ideal 
circumstances.  Why do partials shift if the lead pipe is changed in diameter 
at some section,  or if the horns bore is changed when the tube leaves the 
valve section, some  dramatic changes. Why does the overall intonation change 
very much with  different hand positions or more extreme: hand in the bell 
verse hand out of  the bell ?

Theory is good & helpful but "practica" is different,  very different.

I played professionally for about 50 years on first  horn mostly, but on 
low horn occasionally to help some coplleagues out for a  gig. And the written 
c2 (2nd space) is in tune on most F- & Bb-sides. You  even can wiggle on 
the thumb valve while playing this note, but no change in  the notes 
intonation, required the horn is well built horn of the upper  quality class.

A horn student has many other problems than to care  about the maths 
regarding intonation. And a horn student has different  problems than to care 
about which muscle to involve in the playing.

Too  much thinking around is the greatest problem for many players, as they 
lack  the most basic instructions, so things work automatically, bypassing 
the  brain. So the brain ids free & can act as a superb supervisor.

That  is reality, even the acoustic/math matter is very  interesting.

_______________________________________________
post: [email protected]
unsubscribe or set options at 
https://pegasus.memphis.edu/cgi-bin/mailman/options/horn/archive%40jab.org

Reply via email to