Hans, Sorry to take up your time, but I wanted to be sure you saw this.
My card is a PVR-150 actually, and I would love to tell you what chipset I have to help you out via troubleshooting / testing, but I am not sure how to find out the chipset without taking off the heatsink, which I don't want to do if I don't have to. What can I do to help you out in this case, and possibly figure out a way to solve my problem at the same time? Oh, and here's the output of that log-status that you asked for: [EMAIL PROTECTED] mythtv]# ivtvctl --log-status ioctl VIDIOC_LOG_STATUS ok ivtv0: ================= START STATUS CARD #0 ================= tveeprom 0-0050: Hauppauge model 48231, rev D133, serial# 727051 tveeprom 0-0050: tuner model is Temic 4039FR5 (idx 33, type 21) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is MSP3435 (idx 10) tveeprom 0-0050: has radio tuner 0-0061: Tuner mode: analog TV tuner 0-0061: Frequency: 127.25 MHz tuner 0-0061: Standard: 0x00003000 saa7115 0-0021: Audio frequency: 48000 Hz saa7115 0-0021: Video signal: ok saa7115 0-0021: Frequency: 60 Hz saa7127 0-0044: Standard: 60 Hz saa7127 0-0044: Input: normal saa7127 0-0044: Output: S-Video + Composite saa7127 0-0044: WSS: disabled saa7127 0-0044: VPS: disabled saa7127 0-0044: CC: disabled msp3400 0-0040: MSP3435G-B6 rev1 = 0x0207 rev2 = 0x2346 msp3400 0-0040: Audio: volume 58950 msp3400 0-0040: Audio: balance 32768 bass 32768 treble 32768 loudness off msp3400 0-0040: Standard: could not detect sound standard (mono) msp3400 0-0040: Audmode: 0x0001 msp3400 0-0040: Routing: 0x00000000 (input) 0x00000044 (output) msp3400 0-0040: ACB: 0x0c00 ivtv0: ================== END STATUS CARD #0 ================== Mito -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hans Verkuil Sent: Saturday, July 01, 2006 5:00 PM To: User discussion about IVTV Subject: Re: [ivtv-users] No sound after updating to ivtv 7 and kernel 2.4.17 On Saturday 01 July 2006 22:46, Mito wrote: > Hello to all! > > First of all, thanks to everyone who will help, as I know how much > work it is sometimes to help people. > > My problem first started a few days ago when I was trying to re-setup > my frontend to my MythTV system. In doing so, I decided to do an > update to my backend server (which in hindsight, I probably shouldn't > have done.). It updated my kernel to version 2.6.17-1.2139_FC4. > Well, as I always do when possible, I rebooted my server after doing > the update just to make sure things behaved properly, and to let the > new kernel be used. I left it at this time, but then a day and a > half later I noticed that none of my recordings have been taking > place. I do a little troubleshooting and do another yum update, and > this time find a new ivtv and ivtv-modules (I used the atrpms to > install ivtv originally) so I figure that there is a new version of > ivtv for my new kernel, cool, this will fix my problem. Well, it > did, kinda. Now I am recording video, which is always nice, but no > audio. Just to be sure that it wasn't a MythTV problem, I ran this > command: > > cat /dev/video0 > test.mpg > > Then I played that file, and sure enough, there's video but no sound. > Also to make sure that I wasn't having problems with my sound, I > played a recording from before the update, and the sound works > perfectly. > > Then in troubleshooting, I backed up my firmware files and then > replaced them via the instructions here: > http://ivtvdriver.org/index.php/Firmware#Obtaining_and_Installing_the >_Firmwa re > > That still didn't work. so now I'm emailing for help, as I need it > :-) > > Here is my dmesg. Thanks in advance for any help you're able to > give! Please provide the output of ivtvctl --log-status while recording a program. It should give me some info on the sound. By the way: can you verify that your card has a saa7114 chip instead of a saa7115? I noticed this in your log. It's probably quite an old PVR350, right? If you do have a saa7114, then I'd like to ask you some tests. Note that this is unrelated to your sound problem, it's just an issue with the saa7114 that I'd like to clear up. Thanks, Hans > > > ivtv: no version for "struct_module" found: kernel tainted. > ivtv: ==================== START INIT IVTV ==================== > ivtv: version 0.7.0 (development snapshot compiled on Thu Jun 29 > 13:55:05 2006) loading > ivtv: Linux version: 2.6.17-1.2139_FC4 mod_unload 686 REGPARM > 4KSTACKS gcc-4.0 > ivtv: In case of problems please include the debug info between > ivtv: the START INIT IVTV and END INIT IVTV lines, along with > ivtv: any module options, when mailing the ivtv-users mailinglist. > ivtv0: Autodetected Hauppauge WinTV PVR-350 card (cx23415 based) > ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 169 > ivtv0: Unreasonably low latency timer, setting to 64 (was 32) > tveeprom 0-0050: Hauppauge model 48231, rev D133, serial# 727051 > tveeprom 0-0050: tuner model is Temic 4039FR5 (idx 33, type 21) > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 0-0050: audio processor is MSP3435 (idx 10) > tveeprom 0-0050: has radio > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > saa7115 0-0021: saa7114 found @ 0x42 (ivtv i2c driver #0) > saa7127 0-0044: saa7127 found @ 0x88 (ivtv i2c driver #0) > msp3400 0-0040: MSP3435G-B6 found @ 0x80 (ivtv i2c driver #0) > msp3400 0-0040: MSP3435G-B6 supports radio, mode is autodetect and > autoselect > ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) > ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes) > ivtv0: Encoder revision: 0x02050032 > ivtv0: Decoder revision: 0x02020023 > ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB > total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers > (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 > buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: > 455 x 4608 buffers (2048KB total) > ivtv0: Create encoder radio stream > ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB > total) ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers > (1024KB total) ivtv0: Create decoder VOUT stream > ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB > total) ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes) > tuner 0-0061: type set to 21 (Temic NTSC (4039 FR5)) > ivtv0: Initialized Hauppauge WinTV PVR-350, card #0 > ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
