Hi all, Just 47k from /mcrl to Vcc, without the capacitor, works great too. I have over 2 dozen boards with this setup and never had any problems.
But Wayne has a point here: the pickit2-pinout of the programming connector is most commonly used. It's not my favorite either, but the best one to present to new users and it is good to see jaluino uses it too! Joep 2010/3/24 m...@watty <[email protected]>: > 470 Ohms is bad.. > > an ordinary 1N4148 or 1N916 works. ( On Many PICs simply diode from > VCC to MCLR and no 10K + 0.1) > > If you DO put a 10K & 0.1 aka 100nF, the 10K should have a 2nd > 1N916/1N4148 pointing from Cap to VCC. This ensures capacitor > discharges if short power outage and you get a proper reset. > > -- > You received this message because you are subscribed to the Google Groups > "jallib" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/jallib?hl=en. > > -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
