> I have attached, I hope it is allow, the schematic I suggested as it is > different from the one you published. There is a *glaring* difference. > > Wayne
Thanks Wayne, It looks like I have the same circuit on the ICSP tutorial, although the ICSP port pinout is different. Also, there is no reset switch in that schematic. Is there any issue witht he one I have in the tutorial? What does need to be fixed, is my ICSP tutorial's port pinout should match Jaluino ICSP port pinout, and both of these should match microchip's PIC Kit 2 pinout. I have not had time to check this. Seb, does Jaluino match the ICSP port in the schematic Wayne just posted? What I was really looking for at the time is the ability to connect both ICSP and bootloader with CTS reset at the same time. I have successfully done this, but have not had anyone verify it's workings. There may be an issue with "insufficient reset at startup". My main reason for doing this is that I would like to test many bootloaders, this means I must program via ICSP, then test the bootloader via serial port. I suppose I have given up on this due to lack of assistance, although you have all been a great help on this, it does require more thought. I simply do not have the electronics knowledge. Matt. -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
