Pedro,
I finally have all the no connections fixed, but when I fill the zone it
avoids the traces on that layer. When I put the cursor on a pin connected to
the net on that inner layer it won't fill the zone. How do I get it to fill
over the traces on that layer?
Thanks, Ron
Pedro Martín <[EMAIL PROTECTED]> wrote:
Hi,
> Just to make sure I understand. Connecting pins to an internal layer
> using vias and then filling the plane is not recognized as a connection by
> the connection tool. Is that right?
Yes, the connecting tool does not recognize zones. No matter the layer the
zone belongs to.
> If so, how do I know if there are
> missing connections to the plane?
Well, you need to figure out the outline of the zone, let's say a ground
plane. Then, connect all vias to the zone (not yet drawn) and continue the
track as though there will not be any zone at all.
Once you have no ratsnest, create the zone. The zone will overlap all ground
tracks into its outline.
Regards,
Pedro.
---------------------------------
Be a better Heartthrob. Get better relationship answers from someone who knows.
Yahoo! Answers - Check it out.
