Pedro,
Thanks, for the rapid reply. I didn't have time to work on it last night,
but I will tonight.
Just to make sure I understand. Connecting pins to an internal layer using
vias and then filling the plane is not recognized as a connection by the
connection tool. Is that right? If so, how do I know if there are missing
connections to the plane?
Thanks,
Auld.Timer
Pedro Martín <[EMAIL PROTECTED]> wrote:
Hello,
The connection tool doesn't care about zones. Though in a real pcb the signal
is connected, it is not logically connected from the connection tool point of
view.
I connect the trace to another trace or pin of the same net. Aftewards, I
create the zones. The traces are then covered by the zone. Zones should be
created after the whole pcb has been routed.
Pedro.
> Also, I have a problem connecting to internal planes. I selected the
> proper layers for the via's and then selected the proper working layer
> and created/filled a zone. It looks like there are connections, but
> it still shows a ratsnest to the ground and power connections and I
> have unconnected nets. I have deleted and gone through that process
> twice.
---------------------------------
Shape Yahoo! in your own image. Join our Network Research Panel today!
