If anybody needs an instrument template that you can use to center punch
and match drill your "paper doll" instrument panel, here's a template
for 3.125" and 2.25" instruments. Automotive instruments like oil
pressure or mixture meters are often 2..0625 diameter. See
http://www.craggyaero.com/Drawings/Instrument%20Hole%20Templates.pdf .
A hole saw is quite useful for this endeavor as well, unless you can
borrow an aircraft instrument panel punch from somebody (local EAA
chapter, perhaps). I used dumb hole saws and a drill press, although
just a drill works fine also. It goes pretty quick....
Mark Langford
[email protected]
http://www.n56ml.com
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/[email protected]/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to [email protected]
