Alan Stern wrote:
I saw it, but it begins too late -- well after the drive was first plugged in. You may have to capture the debugging output using syslogd instead of dmesg.
This time I removed all USB devices before booting.
The dmesg below starts after an ISOFS from the IDE-CDrom, the last entry before I plugged in the Freecom. It seems less verbose than before, when I "might" have been on the unpatched kernel, since it is not default in Lilo, but I think I did check "uname -a" yesterday, as I did today.
I set the verbose options on the patched kernel anyway.
ehci_hcd 0000:00:0d.2: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
hub 1-0:1.0: port 1 not reset yet, waiting 50ms
ehci_hcd 0000:00:0d.2: port 1 high speed
ehci_hcd 0000:00:0d.2: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: new high speed USB device using address 2
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: default language 0x0409
usb 1-1: Product: FHD-Classic
usb 1-1: Manufacturer: Freecom Technologies
usb 1-1: SerialNumber: 10000000000000000CA89
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
usb-storage 1-1:1.0: usb_probe_interface
usb-storage 1-1:1.0: usb_probe_interface - got id
usb-storage: USB Mass Storage device detected
usb-storage: altsetting is 0, id_index is 72
usb-storage: -- associate_dev
usb-storage: Vendor: Freecom Technologies
usb-storage: Product: FHD-Classic
usb 1-1: control timeout on ep0in
ehci_hcd 0000:00:0d.2: devpath 1 ep0in 3strikes
ehci_hcd 0000:00:0d.2: devpath 1 ep0in 3strikes
ehci_hcd 0000:00:0d.2: devpath 1 ep0in 3strikes
ehci_hcd 0000:00:0d.2: devpath 1 ep0in 3strikes
ehci_hcd 0000:00:0d.2: devpath 1 ep0in 3strikes
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: Endpoints: In: 0xc73b80f4 Out: 0xc73b80e0 Int: 0x00000000 (Period 0)
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
ehci_hcd 0000:00:0d.2: devpath 1 ep0in 3strikes
usb-storage: GetMaxLUN command result is -71, data is 0
usb-storage: storage_probe() failed
usb-storage: -- usb_stor_release_resources
usb-storage: -- dissociate_dev
usb-storage: probe of 1-1:1.0 failed with error -1
> If you post the contents of /proc/scsi/scsi and the
[EMAIL PROTECTED] root]# cat /proc/scsi/scsi Attached devices: [EMAIL PROTECTED] root]#
> /proc/scsi/usb-storage files, maybe they will help show why.
No such file, after the Freecom hotplug has failed lsmod showed no usb-storage module.
It does look like the ehci_hcd needs fixing, as with Eeero's kernel.
I will now reboot with my Maxtor USB HDD in and see if it's different.
Mike
------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
