Messages by Thread
-
-
kernel 2.4 for virtex 2
Joachim Meyer
-
Linux with e500 v2 core, can we support Ram base address starting at 0x1_0000_0000
Subbu Linux
-
Driver - HDLC 83xx QUICC Engine??
Russell McGuire
-
Problems with serial and DHCP when booting from NFS
lipeng
-
RE: MPC5200B SPI codec error when there is a heavy ethernet
Albrecht Moll
-
MPC5200B SPI codec error when there is a heavy ethernet traffic.
Txema Lopez
-
problem with CF
raul . moreno
-
USB Mass Storare (PCI Based)
Ansari
-
Using USB on ML403
Yedu Jathavedan
-
Problem booting Linux 2.6 on Virtex-4
David Baird
-
I2C and CAN bus on MPC5200B device tree
Matt Sealey
-
PPC vs POWERPC
samppa
-
Is it required to develope new hub class driver for MPC8272 in Montavista ?
Smily santhosh
-
In PowerPC's feature, are there any difference between ML410 and ML403?
diak sim
-
Re: [PATCH for 2.6.24][NET] fs_enet: check for phydev existence in the ethtool handlers
Matvejchikov Ilya
-
Trying 10/HALF
Siva Prasad
-
Control not branching to the instruction present at resetvec i.e 0xfffffffc
Siva Prasad
-
Toolchain for Freescale e200
Per-Erik Johansson
-
printk() does not work on UART1
mike zheng
-
Use 2G RAM in 8548, vmalloc fail, adjust_total_lowmem
jay_chen
-
PowerPC Cross Compiler's Arch doesnt match
Jeff Parent
-
Beta Release for MPC5121e Linux BSP
james . mertz
-
trying to boot linux on MVME5100
Phil Howard
-
error : array type has incomplete element type
Rami
-
kernel panic after upgrading to 2.6.22
raul . moreno
-
Generic MMC-over-SPI binding?
Simon Richter
-
port linux-2.6 to ml410, problem on disabling external interrupts
diak sim
-
PPC4xx : Failed to perform memory to memory DMA
padmanabha
-
PPC4xx memory to memory DMA
padmanabha
-
How to config linux kernel(ARCH=powerpc)?
jie han
-
Linux for ml310
Joachim Meyer
-
MMU failure, Virtex4-FX60
Robert Woodworth
-
Re: Howto use PPC4xx memory to memory DMA
padmanabha
-
Concatenation of MTD devices
Sekhar Pedamallu
-
porting linux 2.6 to ml410, no output after "Now booting the kernel", and some other questions
diak sim
-
Drivers' probe function calling order
DI BACCO ANTONIO - technolabs
-
[no subject]
Awad, Sinan (GE Healthcare)
-
MPC8260ADS and linux-2.6
suja Baburaj
-
Reading a config file in a driver ....
Misbah khan
-
File system problem
mojtaba
-
MTD - partioning
Sekhar Pedamallu
-
How to make a extern variable shared between two drivers.
Misbah khan
-
83xx, ELDK 2.6.23, IP-Config: No network devices
Russell McGuire
-
Re: 83xx, ELDK 2.6.23, IP-Config: No network devices
Vitaly Bordug
-
83xx, ucc_geth, kernel 2.6.23, IP-Config: No network devices
Russell McGuire
-
Re: 83xx, ucc_geth, kernel 2.6.23, IP-Config: No network devices
Jochen Friedrich
-
RE: 83xx, ucc_geth, kernel 2.6.23, IP-Config: No network devices
Russell McGuire
-
Re: 83xx, ucc_geth, kernel 2.6.23, IP-Config: No network devices
Jochen Friedrich
-
[PATCHv3] powerpc: DBox2 Board Support
Jochen Friedrich
-
How can I support 2GB of memory in Linux kernel on 440SPe
Vincitore
-
How to do IO mapped Implimentation ???
Misbah khan
-
Using SPI in lite5200
Miguel Angel Alvarez
-
Device node - How does kernel know about it
Siva Prasad
-
[no subject]
chengk_thomson
-
i2c device for a linux 2.6 in XUPV2P
Josep Maria Batlle
-
[PATCHv2] powerpc: DBox2 Board Support
Jochen Friedrich
-
[PATCH] powerpc: DBox2 Board Support
Jochen Friedrich
-
Loop at starting pid 164, tty '': '/sbin/getty'
ramkumarj Ramkumar
-
RE: [techfield] GPIO causing bus error
Elayda, Bernardo (Bernie)
-
Re: GPIO causing bus error
Jeff Mock
-
CONFIG_PCI interaction with pata_platform driver on MPC834x board
Johns Daniel
-
Changes to Freescale I2C driver makes it stop working for us moving from 2.6.22 to 2.6.23.9
michael.firth
-
MPC83xx - 2.6.23, UCC_GETH and NFS Boot
Russell McGuire
-
Differences between git tree
Bizhan Gholikhamseh (bgholikh)
-
Re: MPC885 - USB HCI drivers.
Jonathan Journo
-
tiny login
pjmaiya
-
Re: some questions about XUP and the generation of ace file
greenlean
-
DTS files, 83xx, clock frequencies
Russell McGuire