Um.. I know the tired thing... But what was not working? On Sep 25, 2016 10:18 PM, "John Pickens" <[email protected]> wrote:
> So, > The printer is electromechanically complete, it is time for Machinekit on > Beaglebone Black with CRAMPS to be configured. > I loaded up the SD card image from the Machinekit link to the Debian auto > packager as mentioned above > > Opened up Machinekit with the default ArmCramps demo files, and all was > fine. > It came right up displaying the bed and extruder temperatures. > I browsed to the XY and Z min endstops, and they were all true, and > changed to false when I pressed the limit switch and interupted the endstop. > > Great!, now I just need to convert from Trivkins to Lineardeltakins, and > configure the HAL and INI files. > > I copied the example CRAMPS.lineardelta.hal and CRAMPS.lineardelta.ini > from the Brandon Heller posts on this subject. > His was set up for a Rostock Mini, but I thought that would be close, and > I'd have to tweak the dimensions and stepper settings, but otherwise should > be relatively simple. > > Well, I guess I did something wrong, Not working. I'm done for the > evening, and will give it a go again tomorrow. > > Does anyone have a recent set of Cramps.ini and .hal configuration files > for lineardelta delta printers they would recommend? > Do I only need the .ini and .hal files, or are there accompanying files > needed also? > > Thanks in advance. > John > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to a topic in the > Google Groups "Machinekit" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/machinekit/r-zA_yTRuVA/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
