Bas, Thanks for the much more recent config file links. There's a bunch of configurations on your github list, which would be the best to try? Any recommendations on changes needed for a BeBoPr++ config to work with CRAMPS?
Again, many thanks. On Monday, September 26, 2016 at 4:59:50 PM UTC-4, Bas de Bruijn wrote: > > > > On 9/26/2016 9:52 PM, John Pickens wrote: > > After reading Brandon Heller's recommendation to ask for a sample > > configuration file setup, I'll go ahead and ask...Has anyone got a > > current configuration for Cramps with a Delta? > > This should be a recent one for a BeBoPr++ board, not CRAMPS. I've > added a lot of extra for velocity extruding which you probably don't > need, but these lines are the important ones. > > https://github.com/luminize/machinekit/blob/vel-extrusion-3-merge/configs/ARM/BeagleBone/BeBoPr%2B%2B/Pepper/vel-extr-3-pepper.hal#L20-L30 > > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
