On 1/12/2018 3:36 PM, gary wrote:
> Guess i am not getting the setp lineardeltakins.j{X}off 0.1 command i
> always get an error no pin or along these lines
You likely have the pin name slightly wrong. Run the command "halcmd
show pin" and you'll get a list of all current HAL pins. It should be
fairly obvious which pin is the one you should be using with "halcmd
setp <pin-name> <value>".
--
Charles Steinkuehler
[email protected]
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
