Hey there! I guess it would help if you post your hal file, set debug to 5 and post your debug output. Best regards.
Em quinta-feira, 28 de março de 2019 10:34:18 UTC-3, Bradley Turner escreveu: > > Hello, > I am trying to setup a similar config on my machine, although I only have > a gantry config on the X axis. Every time I change something in the .hal > file I will no longer be able to get machinekit to boot. It will show the > splashscreen and then never load the AXIS gui. I am very new to Linux CNC, > so any help would be greatly appreciated. > > On Monday, October 16, 2017 at 9:55:21 PM UTC-4, Tom M wrote: >> >> >> I finally got my homing and deracking tuned for my dual gantry MPCNC. >> Here's a video: >> https://youtu.be/FRT0teFvGy8 >> >> (Thanks Charles, for your wonderful work) >> >> >> >> On Saturday, September 30, 2017 at 7:16:20 PM UTC-5, Tom M wrote: >>> >>> Well the Milwaukee Makerfaire is done, I had my MPCNC running for 2 days >>> straight and I was fair pleased with how it ran. >>> At the time I only had auto-homing working on the x but that's all fixed >>> now. >>> >>> If someone wants use an MPCNC with Machinekit and a Cramps on a >>> beaglebone you can find it here: >>> https://github.com/Workshop88/MPCNC/tree/AutoHoming >>> Its not perfect and I'm not done, but it works. One issue I had was >>> that the motors would skip after a the carriage deracked and it was >>> returning to the home position. I could keep if from skipping by keeping >>> the home distance short. It seems that this mode doesn't respond to max >>> job speed or max velocity overide in axis display. I'm assuming the fix >>> is just to reduce the max velocity settings. >>> >>> >>> >>> On Tuesday, September 19, 2017 at 11:53:28 PM UTC-5, Tom M wrote: >>>> >>>> Well, I'm doing my happy dance.. >>>> My current issue is I didn't have my xenable signal tied into my >>>> enable, powerup and led on my cramps board... (Thanks for the hints but >>>> not >>>> the answer) Now I'm getting dangerous since I'm starting to think I almost >>>> know what I'm doing... >>>> I'm able to jog and do manual homing...Next step I need to get my >>>> switches wired up and working on the autohoming. I'm hoping I can get >>>> this >>>> ready for the Milwaukee makerfaire without pulling an all nighter or >>>> two.... Hoo hoo >>> >>> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
