Here is my hal file. I am currently getting the error "3D.post.gui.hal:4 Pin 'pyvcp.E0.Temp.set' does not exist." And I am not totally sure what that all means, Sorry! I took the standard CRAMPS CNC configuration files, and used the deracking MPCNC settings to try and setup deracking on the Y-gantry.
On Thursday, March 28, 2019 at 10:46:38 AM UTC-4, Paulo Sherring wrote: > > Hey there! I guess it would help if you post your hal file, set debug to 5 > and post your debug output. > Best regards. > > Em quinta-feira, 28 de março de 2019 10:34:18 UTC-3, Bradley Turner > escreveu: >> >> Hello, >> I am trying to setup a similar config on my machine, although I only have >> a gantry config on the X axis. Every time I change something in the .hal >> file I will no longer be able to get machinekit to boot. It will show the >> splashscreen and then never load the AXIS gui. I am very new to Linux CNC, >> so any help would be greatly appreciated. >> >> On Monday, October 16, 2017 at 9:55:21 PM UTC-4, Tom M wrote: >>> >>> >>> I finally got my homing and deracking tuned for my dual gantry MPCNC. >>> Here's a video: >>> https://youtu.be/FRT0teFvGy8 >>> >>> (Thanks Charles, for your wonderful work) >>> >>> >>> >>> On Saturday, September 30, 2017 at 7:16:20 PM UTC-5, Tom M wrote: >>>> >>>> Well the Milwaukee Makerfaire is done, I had my MPCNC running for 2 >>>> days straight and I was fair pleased with how it ran. >>>> At the time I only had auto-homing working on the x but that's all >>>> fixed now. >>>> >>>> If someone wants use an MPCNC with Machinekit and a Cramps on a >>>> beaglebone you can find it here: >>>> https://github.com/Workshop88/MPCNC/tree/AutoHoming >>>> Its not perfect and I'm not done, but it works. One issue I had was >>>> that the motors would skip after a the carriage deracked and it was >>>> returning to the home position. I could keep if from skipping by keeping >>>> the home distance short. It seems that this mode doesn't respond to max >>>> job speed or max velocity overide in axis display. I'm assuming the fix >>>> is just to reduce the max velocity settings. >>>> >>>> >>>> >>>> On Tuesday, September 19, 2017 at 11:53:28 PM UTC-5, Tom M wrote: >>>>> >>>>> Well, I'm doing my happy dance.. >>>>> My current issue is I didn't have my xenable signal tied into my >>>>> enable, powerup and led on my cramps board... (Thanks for the hints but >>>>> not >>>>> the answer) Now I'm getting dangerous since I'm starting to think I >>>>> almost >>>>> know what I'm doing... >>>>> I'm able to jog and do manual homing...Next step I need to get my >>>>> switches wired up and working on the autohoming. I'm hoping I can get >>>>> this >>>>> ready for the Milwaukee makerfaire without pulling an all nighter or >>>>> two.... Hoo hoo >>>> >>>> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
CRAMPS.hal
Description: Binary data
