Thanks Terry, a few coments
below..
----- Original Message -----
From: "Terry & Heather" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, September 08, 2000 3:02
AM
Subject: RE: 1600 High speed
stability
> Geezers Mark,
>
> What's it cost for 140 mph these days. (:-
>
> What's it cost for 140 mph these days. (:-
In N.T. nothing. In
N.S.W. minumum : over 45kph ticket $1419, six points, 3 months suspension
of licence. Worst scenario, court appearance for speed dangerous.
Average penalty $1000, 1 year disqualification.(maximum : $5000, 5years
disqualification, 12 months imprisonment, but "as if" with the pissweak courts
in NSW) Speed dangerous much harder to prove though, not only speed is
taken into account, but road conditions, traffic on road, potential danger,
actual danger. If it's 3.00am, there's no other traffic, on a well built
freeway, pretty hard to get a conviction on. (In reality, it's "only"
double the speed limit. Not like doing 180 in a 40 zone, at 3.00pm outside
a school).
PS: for me, prolly my
job.
>
> go well don't they, I hope your welding is up to it and it's good to see
> your you have good high speed stability. This more than justifies the
> expense to increase the ride height to a more sensible level. Can you
> imagine your old bump steering setup handling that sort of speed safely - I
> think not.
>
> ppl that haven't been in a 510/FJt on song just can't image the power, and I
> see you're creeping the boost up too, watch that detonation. I think I smell
> an intercooler and 14 psi coming on, then they really are crazy in a 1600.
>
> Was that on PULP or Optimax (tried that stuff yet, it goes well in the L
> series too but exy)
> go well don't they, I hope your welding is up to it and it's good to see
> your you have good high speed stability. This more than justifies the
> expense to increase the ride height to a more sensible level. Can you
> imagine your old bump steering setup handling that sort of speed safely - I
> think not.
>
> ppl that haven't been in a 510/FJt on song just can't image the power, and I
> see you're creeping the boost up too, watch that detonation. I think I smell
> an intercooler and 14 psi coming on, then they really are crazy in a 1600.
>
> Was that on PULP or Optimax (tried that stuff yet, it goes well in the L
> series too but exy)
That was running normal ULP, can't
run anymore than 11psi without faint pinging. Not that I want to on stock
pistons. I haven't tried PULP or optimax. But when I pay those
bills, I'm looking into a water to air i/c.
>
> Which diff in at the moment - you can use the gearing spreadsheet to check
> my calculations.
>
> Err... let's see
>
> 195/60x14 5th 0.852 at 6500 rpm
>
> 3.55 = 144.2 mph
> 3.70 = 138.4 mph
> 3.90 = 131.3 mph
>
> insane (:-
WHOOO-HOOOO
!
>
> Terry (just kiddn mate)
>
> Terry (just kiddn mate)
>
Wardy ;)
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Mark Ward
> Sent: Thursday, 7 September 2000 12:47 PM
> To: [EMAIL PROTECTED]
> Subject: Re: 1600 High speed stability
>
>
> Gave it a go last night but ran out of road. Got to 6,500 in 5th and no
> word of a lie, it wasn't slowing down. If I had another gear I'd go for it.
> The speedo was hard off the clock. (Running 10psi) Tyres 195/60/r14's.
> I'll give another go soon. I have no idea what speed I was doing !
>
> Wardy
> ----- Original Message -----
> From: "Terry & Heather" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, August 30, 2000 2:06 AM
> Subject: RE: 1600 High speed stability
>
>
> > Jake,
> > That's what I would have expected from a good FJ/510, something close to
> the
> > speed the DR30 RS-X is capable of in race trim as they would have been
> > around 1000kg, I think the Gibson cars were doing ~260 kph down conrod.
> > Damn, you're quicker in 4th (just) 7500 = 132mph or 212 kph than mine was
> in
> > 5th with 4.375 rear gears; Your 5th @ 7500 = 155 mph or 250 kph and that's
> > the best yet. I wonder what Wardy can pull when he gets it all sorted out
> > with 3.55 rear gears.
> >
> > terry
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of Turbo 510
> > Sent: Tuesday, 29 August 2000 12:54 PM
> > To: [EMAIL PROTECTED]
> > Subject: RE: 1600 High speed stability
> >
> >
> > I've had my FJ20T 1600 wound out to 7500rpm in 5th with 3.7:1 diff gears
> and
> > 195/50/15's. Sits solid as a rock and it's only 1" lowered with an
> > adjustable front end and good shocks/springs. Speedo's jammed against the
> > wrong side of the 0 stop but I'd estimate close to 240kmh.
> > My bro wound his SR20DET 1600 out to 7200rpm in 4th with 3.5:1 diff gears
> > and 225/40/16's. Speedo needle pointing straight down so I'd estimate
> around
> > 200kmh. His car sit's 2.5" down at the front, 1.5" at the rear, again with
> > good quality springs/shocks and he also runs a rear sway bar.
> > Jake
> >
> >
> > >Any car without a rear spoiler will wiggle it's ass at +140km/h. It's
> also
> > >got something to do with air flow and traction..
> >
> > _________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
> >
> > Share information about yourself, create your own public profile at
> > http://profiles.msn.com.
> >
> >
> >
> >
>
>
>
> --membersozdat-------------------------------------------------------
> OZDAT Mailing List Please Note:-
> Send (un)subscribe requests to [EMAIL PROTECTED]
> Send submissions to [EMAIL PROTECTED]
> No unauthorised redistribution of this email
> http://www.ozdat.com/ozdatonline/index.htm
> http://www.ozdat.com/ozdatonline/listindex.html
> http://www.mail-archive.com/[email protected]/
> ---------------------------------------------------------------------
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Mark Ward
> Sent: Thursday, 7 September 2000 12:47 PM
> To: [EMAIL PROTECTED]
> Subject: Re: 1600 High speed stability
>
>
> Gave it a go last night but ran out of road. Got to 6,500 in 5th and no
> word of a lie, it wasn't slowing down. If I had another gear I'd go for it.
> The speedo was hard off the clock. (Running 10psi) Tyres 195/60/r14's.
> I'll give another go soon. I have no idea what speed I was doing !
>
> Wardy
> ----- Original Message -----
> From: "Terry & Heather" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, August 30, 2000 2:06 AM
> Subject: RE: 1600 High speed stability
>
>
> > Jake,
> > That's what I would have expected from a good FJ/510, something close to
> the
> > speed the DR30 RS-X is capable of in race trim as they would have been
> > around 1000kg, I think the Gibson cars were doing ~260 kph down conrod.
> > Damn, you're quicker in 4th (just) 7500 = 132mph or 212 kph than mine was
> in
> > 5th with 4.375 rear gears; Your 5th @ 7500 = 155 mph or 250 kph and that's
> > the best yet. I wonder what Wardy can pull when he gets it all sorted out
> > with 3.55 rear gears.
> >
> > terry
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of Turbo 510
> > Sent: Tuesday, 29 August 2000 12:54 PM
> > To: [EMAIL PROTECTED]
> > Subject: RE: 1600 High speed stability
> >
> >
> > I've had my FJ20T 1600 wound out to 7500rpm in 5th with 3.7:1 diff gears
> and
> > 195/50/15's. Sits solid as a rock and it's only 1" lowered with an
> > adjustable front end and good shocks/springs. Speedo's jammed against the
> > wrong side of the 0 stop but I'd estimate close to 240kmh.
> > My bro wound his SR20DET 1600 out to 7200rpm in 4th with 3.5:1 diff gears
> > and 225/40/16's. Speedo needle pointing straight down so I'd estimate
> around
> > 200kmh. His car sit's 2.5" down at the front, 1.5" at the rear, again with
> > good quality springs/shocks and he also runs a rear sway bar.
> > Jake
> >
> >
> > >Any car without a rear spoiler will wiggle it's ass at +140km/h. It's
> also
> > >got something to do with air flow and traction..
> >
> > _________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
> >
> > Share information about yourself, create your own public profile at
> > http://profiles.msn.com.
> >
> >
> >
> >
>
>
>
> --membersozdat-------------------------------------------------------
> OZDAT Mailing List Please Note:-
> Send (un)subscribe requests to [EMAIL PROTECTED]
> Send submissions to [EMAIL PROTECTED]
> No unauthorised redistribution of this email
> http://www.ozdat.com/ozdatonline/index.htm
> http://www.ozdat.com/ozdatonline/listindex.html
> http://www.mail-archive.com/[email protected]/
> ---------------------------------------------------------------------
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
