Mate, Adj. lower arms are only a means to achieveing your desired camber settings. By the sounds of it you already have a degree or two of neg camber with your setup which is whats causing your tyres to wear on the inside. You "could" put adj arms on it and reset the front camber back out to give you 0 deg camber but then by doing this you are comprimising your handling characteristics. My advice would be to just rotate your tyres as the more handling you can have the better, which by the sounds of it is your way of thinking also................ Steve.
Justin Friedrichs wrote: > Errol, > I'm getting inside tyre wear with my current strut set-up with bluebird > struts s1/2 and r31 brakes. Will adjustable control arms rectify this > problem? I'm forking out for Konis toosoon so I want to make sure my combo > handles as well as any other. My shocks are currently blown, it has king > springs so its really bangs around corners, handles shitty. > Will everything be good. > > Thanx mate. > > Justin > > > -----Original Message----- > > From: E Smith [SMTP:[EMAIL PROTECTED]] > > Sent: Wednesday, February 27, 2002 5:46 AM > > To: [EMAIL PROTECTED] > > Subject: RE: Toyota Super Chargers > > > > The only one I have seen had a new multi groove crank pulley made up, and > > continued to use the stock pulley on the charger. It went very well. > > > > Cheers > > Feral Errol > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]On Behalf Of James Fitness > > Sent: Wednesday, 27 February 2002 4:48 AM > > To: membersozdat > > Subject: Toyota Super Chargers > > > > Hi All > > > > Does anyone know what people do for pulleys when fitting > > a toyota supercharger to a L series? > > A friend of mine is fitting one to a Z18ET (to replace a dud turbo > > that came with the motor from someone in NZ :) and is looking > > at getting a custom pulley made up and I thought there has to be an > > easier/cheaper option.... anyone got any ideas?? > > > > James > > > > > > -- > > ________________________________________________________________________ > > > > James Fitness > > Director > > Data Scribe Australia Pty Ltd > > http://www.datascribe.com.au > > Computers and Supplies > > > > OZDAT Online > > http://www.ozdat.com/ozdatonline/index.htm > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
