I am fixing up a Datto and it has a bit of rust in the doors which I cut out
and griinded and sanded and fibreglassed up and metal bogged and bogged etc
etc. On the inside of the doors I used Sellys Rust Fix which makes a shiney
black coating. Then I put fish oil on top of it on one side of the car
inside the doors. It really stinks even though it was a "Deodorised" brand.
What sort of coating is recommended inside the doors and infront of the
windscreen where the leaves get in? I have some "body deadener" which is
thick black stuff, and I thinned some down and uused it under the front
guards... is that recommended for these areeas? Or would "Penetrol" be
better? I am doubting the effectiveness of the fish oil I used since it has
been a week since I put it in and it's still dripping out.
From: Paul Stanley
[EMAIL PROTECTED]
----- Original Message -----
From: Richard Clough <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, June 12, 2002 9:13 PM
Subject: Re: Rust Troubles
> I bought it from a specialist paint retailer. Our local chain is called
> Paintright. They told me about the stuff after I asked how to kill rust in
> Datto rear guards. The paint guy was adamant this would stop rust even in
> places that you couldn't clean up. It is very watery in viscosity and
gets
> into every part of the metal with a slight fizz reaction with the rust.
It
> dries to a thin, shiny finish.
>
> I initially bought a spray can size 350ml for about $12. After using 2
spray
> cans on a whole range of metal objects, I have now bought a 4 litre tin,
> much more economical.
> ----- Original Message -----
> From: "Kristian Walsham" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, 12 June 2002 7:51 AM
> Subject: Re: Rust Troubles
>
>
> > Richard,
> > Where can you buy Penetrol from?
> >
> > Kris
> > ----- Original Message -----
> > From: "Richard Clough" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Tuesday, June 11, 2002 10:08 PM
> > Subject: Re: Rust Troubles
> >
> >
> > > One option is to spray Penetrol on the problem. This stuff
neutralises
> > the
> > > rust and seals it in with a semi gloss coating. As long as you hit
all
> > the
> > > rust with it seems to stop it dead.
> > > I used it about 2 years ago on serious rust (holes) in the rear wheel
> > arches
> > > of a fast decaying 1600. It has halted the growth of the rust problem.
> We
> > > have put off proper repairs for 2 years so far.
> > > ----- Original Message -----
> > > From: "Ashley Neal" <[EMAIL PROTECTED]>
> > > To: <[EMAIL PROTECTED]>
> > > Sent: Monday, 10 June 2002 1:20 AM
> > > Subject: RE: Rust Troubles
> > >
> > >
> > > > Well the real thing is, that it is a very hard to get at place
> enclosed
> > so
> > > > the access to the area is limited but i will re-evaluate the area in
> the
> > > > morning and see about that.
> > > >
> > > > Thanks mark.
> > > >
> > > > > -----Original Message-----
> > > > > From: [EMAIL PROTECTED]
> > > > > [mailto:[EMAIL PROTECTED]]On Behalf Of mark
> > krawczuk
> > > > > Sent: Sunday, 9 June 2002 23:49 PM
> > > > > To: [EMAIL PROTECTED]
> > > > > Subject: Re: Rust Troubles
> > > > >
> > > > >
> > > > > hi , not sure exactly whats it like, but maybe you could use some
> > > > > stainless
> > > > > steel mesh , and then fiberglass over the top?
> > > > >
> > > > > mark k
> > > > > ----- Original Message -----
> > > > > From: "Ashley Neal" <[EMAIL PROTECTED]>
> > > > > To: <[EMAIL PROTECTED]>
> > > > > Sent: Sunday, June 09, 2002 6:00 PM
> > > > > Subject: Rust Troubles
> > > > >
> > > > >
> > > > > > Having Rust Troubles With R31 Pintara,
> > > > > >
> > > > > > I have recently found a nasty terrible problem with rust in my
> pride
> > > and
> > > > > joy
> > > > > > stock standard :-) Pintara.
> > > > > >
> > > > > > The rust has set in on the water gully under the front
> > > > > windscreen, and it
> > > > > > seems to have eaten a nasty hole inside the boxed in section
near
> > the
> > > > > intake
> > > > > > for the fan box, and on the drivers side just above the wiring.
> > > > > >
> > > > > > Other then this the car is a very sound car, i don't want to
> > > > > get rid of it
> > > > > > just cause of these hole's but because my attempts to fix it
have
> > been
> > > > > null
> > > > > > and void i was wanting to know is it easier / safe to cut the
> boxed
> > > out
> > > > > > section with a oxi, and then plate and fix the rust like that
> > > > > and then set
> > > > > > the boxed section back in?!?!
> > > > > >
> > > > > > Has anyone ever encountered this trouble before. because i would
> > like
> > > to
> > > > > > know cause i also have a R31 Skyline Silhouette 1989.
> > > > > >
> > > > > > Any Help
> > > > > >
> > > > > > TIA
> > > > > >
> > > > > > Ashley.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
