Richard,
Where can you buy Penetrol from?
Kris
----- Original Message -----
From: "Richard Clough" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 11, 2002 10:08 PM
Subject: Re: Rust Troubles
> One option is to spray Penetrol on the problem. This stuff neutralises
the
> rust and seals it in with a semi gloss coating. As long as you hit all
the
> rust with it seems to stop it dead.
> I used it about 2 years ago on serious rust (holes) in the rear wheel
arches
> of a fast decaying 1600. It has halted the growth of the rust problem. We
> have put off proper repairs for 2 years so far.
> ----- Original Message -----
> From: "Ashley Neal" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Monday, 10 June 2002 1:20 AM
> Subject: RE: Rust Troubles
>
>
> > Well the real thing is, that it is a very hard to get at place enclosed
so
> > the access to the area is limited but i will re-evaluate the area in the
> > morning and see about that.
> >
> > Thanks mark.
> >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED]
> > > [mailto:[EMAIL PROTECTED]]On Behalf Of mark
krawczuk
> > > Sent: Sunday, 9 June 2002 23:49 PM
> > > To: [EMAIL PROTECTED]
> > > Subject: Re: Rust Troubles
> > >
> > >
> > > hi , not sure exactly whats it like, but maybe you could use some
> > > stainless
> > > steel mesh , and then fiberglass over the top?
> > >
> > > mark k
> > > ----- Original Message -----
> > > From: "Ashley Neal" <[EMAIL PROTECTED]>
> > > To: <[EMAIL PROTECTED]>
> > > Sent: Sunday, June 09, 2002 6:00 PM
> > > Subject: Rust Troubles
> > >
> > >
> > > > Having Rust Troubles With R31 Pintara,
> > > >
> > > > I have recently found a nasty terrible problem with rust in my pride
> and
> > > joy
> > > > stock standard :-) Pintara.
> > > >
> > > > The rust has set in on the water gully under the front
> > > windscreen, and it
> > > > seems to have eaten a nasty hole inside the boxed in section near
the
> > > intake
> > > > for the fan box, and on the drivers side just above the wiring.
> > > >
> > > > Other then this the car is a very sound car, i don't want to
> > > get rid of it
> > > > just cause of these hole's but because my attempts to fix it have
been
> > > null
> > > > and void i was wanting to know is it easier / safe to cut the boxed
> out
> > > > section with a oxi, and then plate and fix the rust like that
> > > and then set
> > > > the boxed section back in?!?!
> > > >
> > > > Has anyone ever encountered this trouble before. because i would
like
> to
> > > > know cause i also have a R31 Skyline Silhouette 1989.
> > > >
> > > > Any Help
> > > >
> > > > TIA
> > > >
> > > > Ashley.
> > > >
> > > >
> > >
> > >
> >
> >
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
