Well the real thing is, that it is a very hard to get at place enclosed so
the access to the area is limited but i will re-evaluate the area in the
morning and see about that.

Thanks mark.

> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of mark krawczuk
> Sent: Sunday, 9 June 2002 23:49 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Rust Troubles
>
>
> hi , not sure exactly whats it like, but maybe you could use some
> stainless
> steel mesh , and then fiberglass over the top?
>
>    mark k
> ----- Original Message -----
> From: "Ashley Neal" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Sunday, June 09, 2002 6:00 PM
> Subject: Rust Troubles
>
>
> > Having Rust Troubles With R31 Pintara,
> >
> > I have recently found a nasty terrible problem with rust in my pride and
> joy
> > stock standard :-) Pintara.
> >
> > The rust has set in on the water gully under the front
> windscreen, and it
> > seems to have eaten a nasty hole inside the boxed in section near the
> intake
> > for the fan box, and on the drivers side just above the wiring.
> >
> > Other then this the car is a very sound car, i don't want to
> get rid of it
> > just cause of these hole's but because my attempts to fix it have been
> null
> > and void i was wanting to know is it easier / safe to cut the boxed out
> > section with a oxi, and then plate and fix the rust like that
> and then set
> > the boxed section back in?!?!
> >
> > Has anyone ever encountered this trouble before. because i would like to
> > know cause i also have a R31 Skyline Silhouette 1989.
> >
> > Any Help
> >
> > TIA
> >
> > Ashley.
> >
> >
>
>

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to