Hi guys,
this is my cam chart which came with the cam from nz.
inlet opens 24 deg btdc
inlet closes 89 deg abdc
duration 293 deg
cam lift .317"
valve lift .465"
clearance .010"
@ 050" 3deg atdc - 55deg = 232deg.
inlet fullt open @ 105deg.
exhst opens 64deg bbdc
exhst closes 56deg atdc
duration 298deg
cam lift .317"
valve lift .465"
clearance .012"
53deg - 18deg = 232deg.
can i get the ultimate cam for my L18 and i think i will need to use new valve
springs.
what you say heath.
cheers.
mohit.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[EMAIL PROTECTED]/
---------------------------------------------------------------------
This email and any files transmitted with it are confidential and intended solely for
the use of the individual or entity to whom they are addressed. If you have received
this mail in error, please notify the System Administrator. Please note that any views
or opinions presented in this mail are solely those of the author and do not
necessarily
represent those of the Institute. Finally the recipient should check this mail and any
attachment for the presence of viruses. FIT has a virus detection in place and makes
every reasonable effort to ensure that this message is free from viruses. FIT accepts
no liability for any damage caused by any virus transmitted by this mail
