What compression ratio do they recomend with that cam.I would imagine a fair bit of compression is needed with the inlet closing so late. ----- Original Message ----- From: "Mohit K. Autar" <[EMAIL PROTECTED]> To: "Membersozdat (E-mail)" <[EMAIL PROTECTED]> Sent: Friday, October 08, 2004 9:30 AM Subject: <Unknown Subject>
Hi guys, this is my cam chart which came with the cam from nz. inlet opens 24 deg btdc inlet closes 89 deg abdc duration 293 deg cam lift .317" valve lift .465" clearance .010" @ 050" 3deg atdc - 55deg = 232deg. inlet fullt open @ 105deg. exhst opens 64deg bbdc exhst closes 56deg atdc duration 298deg cam lift .317" valve lift .465" clearance .012" 53deg - 18deg = 232deg. can i get the ultimate cam for my L18 and i think i will need to use new valve springs. what you say heath. cheers. mohit. --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[EMAIL PROTECTED]/ ---------------------------------------------------------------------
