hi all,
i own a neotek elite 40 channel from 1986.
i miss a phase meter in the middle , does anybody knows how i can get
one?
also looking for moving faders, uptown/GML/ whatever is working ....
i am working on refurbishing the console, witch suffers from a lot of
contact problems on all switches... the plan is to give it a treat in
an ultrasonic bath. anybody have experience with putting a whole
channel strip in these ultrasonic bath?
another problem i have is a ground loop in the mixer resulting in a
50Hz hum . the channels will be muted and master +10 DB, monitoring+10
DB , as soon as i start switching channels on (with faders down) the
hum will appear and will sum all channels.
i have checked the power supply and have ordered new components for
the recap, but the problem still arrives from the mixers grounding
method.
if you're familiar with the grounding infra structure of this console
please tip me.
thanx
Barak, they call me dude ...
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
