Hi Kris,
The circuitry that sets the 0vu reference level (for the LED
meters) and the signal generator are on the same circuit board so I
suspect the problems are related. I don't have my Elan docs with me so I
can't delve into it further until Monday. I would have a look for any
burned parts on that board and also make sure that you re-seated all of
the connectors properly when you put the module back. The fact that the
meter problem showed up a few days after you were in there kind of
supports the connector issue theory.
best,
Ike
On 1/15/2010 9:08 PM, Kris w wrote:
Hello Neotek list.
I have a 36 channel neotek Élan that has been great to me
and sounds phenomenal, but im sure everyone on the list
already knows that, but I have two questions: first,
yesterday an interesting thing started happening, when
my multitrack (an Ampex MM-1200 2" 16 track) is reading
0db on all its VU meters via a 1k tone from my alignment
tape, all of my light meters on the board (when set to VU,
not peak) are now reading +3 instead of 0. What would bring this on?
Also a little while ago my signal generator crapped out on
me. I pulled out the center section and had a look to see
if I could spy an obvious problem, but to no avail. where would
be the most obvious place to start, as far as trouble shooting
the problem? Thanks in advance!
Viva Neotek! -Kris
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
--
Ike Zimbel
Zimbel Audio Productions Ltd.
Toronto
416-720-0887
"Studio House Calls". Authorized Warranty service for Allen& Heath, Clear-Com,
Drawmer, Soundcraft, SPL and Yamaha. Repairs and upgrades to analog audio equipment
including: AMEK, dbx, Neve, Neotek, MCI, Soundcraft and more. Ask about our RF Frequency
co-ordination services!
www.zimbelaudio.com
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
