David Fulford replied to the below as follows:
>
> At 03:10 30/06/00 +0100, [EMAIL PROTECTED] wrote:
> >
> >Whenever I try to create a new interface with Genesis
> >Wizard, from NetConnect3, the Wizard dials the number
> >I provide but as soon as connection is reported as being
> >established it hangs up the modem and locks up my machine.
> >This is before it has chance to retrieve any details from
> >the ISP.
> >
> I am fairly sure I had this prolem when I started using NetConnect2. I had
> used a longer RS232 cable than the one supplied between the standard Amiga
> serial interface and the modem. Using the correct length cable cured the
> problem (I also now used an IOBlix seral card).
>
In case of any further interest, I started with NC2 and an IOBlix
1200S; but after establishing logon to my ISP (Freeserve) the line was
dropped after a second or so. Reverting to the standard A1200 serial
port removed the problem.
What's the recommended maximum length of cable from port to modem?
Is it shorter for the faster baud rate?
Stephen Smith
[EMAIL PROTECTED]
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
