Date: Wed, 12 Apr 2000 14:41:49 -0400
From: Walter Scott <[EMAIL PROTECTED]>
Subject: Re: Blacklisted
Ron:
for a USR 14.4k or 28.8k Sportster modem, ATD only takes the modem
off-hook. The modem will NOT dial with ATD alone. No dial string is
complete without an appended "T" (for touchtone) or "P" (for pulse).
The "ATD,T" string is one of several dial strings provided in
Net-Tamer itself from its terminal setup screen. Press F3 after
Net-Tamer starts, select option C, then option C from the subsequent
setup menu, and review the several strings available there to verify
that ATD,T is one such string. You step through those strings by
pressing the "C" key until you've seen all available strings.
Walter Scott
Quoting Ronald C. Dailey <[EMAIL PROTECTED]> to Walter Scott
<[EMAIL PROTECTED]> and the members of the Nettamer list
group on 12 Apr 2000 08:55:16 +0700:
RD> "ATD" tells the modem to go off hook and start dialing, using the
RD> default dialing method, which may be tone or pulse, depending on the
RD> modem and how it is set. The "," tells the modem to pause for the
RD> length of time defined in the register for pauses, which is generally
RD> 2 seconds for each "," you insert. "T" is the what you are telling
RD> the modem to "dial" and since the modem doesn't understand "T" as a
RD> number or character it can dial, that's why it stops.
********************************************************
To unsubscribe from this list,
send a message to [EMAIL PROTECTED] with the single word
Unsubscribe
as the subject.
You MUST use the same address with which you subscribed!
********************************************************
