sounds to me like the ignition or a ground On Jan 22, 2013, at 6:57 PM, jeff mercier wrote:
> while i did not supply the year of the bike, i did provide a detailed list of > what worked and what didnt work in my original post allen. > ".... when i came out to go home, i put the key in and nothing. no lights, no > power to anything...." > > thanks much for affirming that the neutral safety swtich and the kill switch > both have the same function, but my problem is something where no power goes > to anything except the starter and thats only by bridging the terminals in > the starter relay. > im going to try checking out the terminals in the back of the fusebox like a > couple of the other users in this thread suggested. > thanks again for your help. > > > > > From: Allen Thomas <[email protected]> > To: Nightwawk Lovers <[email protected]> > Sent: Tuesday, January 22, 2013 5:45 PM > Subject: Re: [Nighthawk Lovers] trouble with my poor 650 nighthawk > > To my knowledge both the kill switch and the kickstand are ground interrupt > switches for the coil. Do you have a wiring diagram? Do you get lights, or > nothing at all? A detailed list of what works and what doesn't would help us > figure out your bike's issue. > Sent via BlackBerry by AT&T > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > Visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en-US. > > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en-US.
