I have now changed the following, correct ? ## node.conn[0].timeo.noop_out_interval = 5 node.conn[0].timeo.noop_out_interval = 0 node.conn[1].timeo.noop_out_interval = 0
# node.conn[0].timeo.noop_out_timeout = 5 node.conn[0].timeo.noop_out_timeout = 0 node.conn[1].timeo.noop_out_timeout = 0 I noticed this: May 6 08:52:22 manjula iscsid: connection2:0 is operational now May 6 08:52:22 manjula iscsid: connection1:0 is operational now Should the above changes instead be: node.conn[1].xxx node.conn[2].xxx I still see the same errors though: May 6 09:07:06 manjula klogd: connection1:0: ping timeout of 5 secs expired, last rx 4636947795, last ping 4636942795, now 4636950295 May 6 09:07:06 manjula klogd: connection1:0: detected conn error (1011) May 6 09:07:07 manjula iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3) May 6 09:07:10 manjula iscsid: connection1:0 is operational after recovery (1 attempts) May 6 09:08:11 manjula klogd: connection1:0: ping timeout of 5 secs expired, last rx 4636964045, last ping 4636960295, now 4636966545 May 6 09:08:11 manjula klogd: connection1:0: detected conn error (1011) May 6 09:08:12 manjula iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3) May 6 09:08:15 manjula iscsid: connection1:0 is operational after recovery (1 attempts) May 6 09:08:41 manjula klogd: connection1:0: ping timeout of 5 secs expired, last rx 4636971545, last ping 4636970295, now 4636974045 May 6 09:08:41 manjula klogd: connection1:0: detected conn error (1011) May 6 09:08:42 manjula iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3) May 6 09:08:45 manjula iscsid: connection1:0 is operational after recovery (1 attempts) May 6 09:09:49 manjula klogd: connection1:0: ping timeout of 5 secs expired, last rx 4636988378, last ping 4636977795, now 4636990878 May 6 09:09:49 manjula klogd: connection1:0: detected conn error (1011) May 6 09:09:49 manjula iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3) May 6 09:09:52 manjula iscsid: connection1:0 is operational after recovery (1 attempts) May 6 09:10:36 manjula klogd: connection1:0: ping timeout of 5 secs expired, last rx 4637000296, last ping 4637000296, now 4637002796 May 6 09:10:36 manjula klogd: connection1:0: detected conn error (1011) May 6 09:10:37 manjula iscsid: Kernel reported iSCSI connection 1:0 error (1011) state (3) May 6 09:10:40 manjula iscsid: connection1:0 is operational after recovery (1 attempts) There seem to be about one minute between the failures. One observation, it's always connection1:0 that fails. Both target ports are connected to the same switch. Furthermore, are there supposed to as many processes as this ? root 104 2 0 Apr20 ? 00:00:00 [scsi_eh_0] root 124 2 0 Apr20 ? 00:00:00 [scsi_eh_1] root 125 2 0 Apr20 ? 00:00:00 [scsi_eh_2] root 126 2 0 Apr20 ? 00:00:00 [scsi_eh_3] root 127 2 0 Apr20 ? 00:00:00 [scsi_eh_4] root 134 2 0 Apr20 ? 00:00:00 [scsi_eh_5] root 135 2 0 Apr20 ? 00:00:00 [scsi_eh_6] root 9580 2 0 May05 ? 00:00:00 [scsi_eh_24] root 9581 2 0 May05 ? 00:00:00 [scsi_wq_24] root 9583 2 0 May05 ? 00:00:00 [scsi_eh_25] root 9584 2 0 May05 ? 00:00:00 [scsi_wq_25] root 16981 2 0 08:35 ? 00:00:00 [scsi_eh_26] root 16982 2 0 08:35 ? 00:00:00 [scsi_wq_26] root 16984 2 0 08:35 ? 00:00:00 [scsi_eh_27] root 16985 2 0 08:35 ? 00:00:00 [scsi_wq_27] root 18289 2 0 Apr21 ? 00:00:00 [scsi_eh_10] root 18290 2 0 Apr21 ? 00:00:00 [scsi_wq_10] root 18369 2 0 Apr21 ? 00:00:00 [scsi_eh_11] root 18370 2 0 Apr21 ? 00:00:00 [scsi_wq_11] root 18448 2 0 08:52 ? 00:00:00 [iscsi_eh] root 18517 1 0 08:52 ? 00:00:00 /sbin/iscsid -c /etc/ iscsi/iscsid.conf -p /var/run/iscsi.pid root 18518 1 0 08:52 ? 00:00:00 /sbin/iscsid -c /etc/ iscsi/iscsid.conf -p /var/run/iscsi.pid root 18547 2 0 08:52 ? 00:00:00 [scsi_eh_28] root 18548 2 0 08:52 ? 00:00:00 [scsi_wq_28] root 18549 2 0 08:52 ? 00:00:00 [iscsi_scan_28] root 18550 2 0 08:52 ? 00:00:00 [scsi_eh_29] root 18551 2 0 08:52 ? 00:00:00 [scsi_wq_29] root 18552 2 0 08:52 ? 00:00:00 [iscsi_scan_29] root 18719 2 0 Apr21 ? 00:00:00 [scsi_eh_12] root 18720 2 0 Apr21 ? 00:00:02 [scsi_wq_12] root 18722 2 0 Apr21 ? 00:00:00 [scsi_eh_13] root 18723 2 0 Apr21 ? 00:00:00 [scsi_wq_13] root 19272 15942 0 09:15 pts/0 00:00:00 grep scsi root 25657 2 0 May01 ? 00:00:00 [scsi_eh_14] root 25659 2 0 May01 ? 00:00:00 [scsi_wq_14] root 25663 2 0 May01 ? 00:00:00 [scsi_eh_15] root 25664 2 0 May01 ? 00:00:00 [scsi_wq_15] root 26038 2 0 May01 ? 00:00:00 [scsi_eh_16] root 26039 2 0 May01 ? 00:00:00 [scsi_wq_16] root 26041 2 0 May01 ? 00:00:00 [scsi_eh_17] root 26042 2 0 May01 ? 00:00:00 [scsi_wq_17] root 26390 2 0 May01 ? 00:00:00 [scsi_eh_18] root 26392 2 0 May01 ? 00:00:00 [scsi_wq_18] root 26427 2 0 May01 ? 00:00:00 [scsi_eh_19] root 26428 2 0 May01 ? 00:00:00 [scsi_wq_19] root 26763 2 0 May01 ? 00:00:00 [scsi_eh_20] root 26764 2 0 May01 ? 00:00:00 [scsi_wq_20] root 26766 2 0 May01 ? 00:00:00 [scsi_eh_21] root 26767 2 0 May01 ? 00:00:00 [scsi_wq_21] root 27122 2 0 May01 ? 00:00:00 [scsi_eh_22] root 27123 2 0 May01 ? 00:00:00 [scsi_wq_22] root 27125 2 0 May01 ? 00:00:00 [scsi_eh_23] root 27126 2 0 May01 ? 00:00:00 [scsi_wq_23] TIA // Jonas --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---
