on 6/24/04 3:10 AM, Boris Herman at [EMAIL PROTECTED] wrote: > Since I have a spare 5400/160 logic board that physically fits in the > 630 all I need is a 6360 power supply to transform a 68k 630 into a PCI > powermac (worthy of this list), right? Could a different power supply > be used instead - from a different model? The 6360s are pretty scarce > these days. You could just take the face-plate off the 630 and put it on a 6360 with the 5400 board, saves a step or two. I started down that road, but stopped with a 6320 board in a 6300 case. It has the t.v. card, the video card, the mpeg decoder, commslot nic 72 mgs of ram external video connector. It is mostly an overflow storage unit and an office t.v. (hooked up to the Dish) but it is online if I need it to be via the ethernet nic to my dsl router. I really like the startup chime better than any other Mac series. You get this chime, by the way, in a Quadra 700 with an Apple 601 PPC upgrade. etc. etc. etc. -- All the Best,
R.A. Cantrell [EMAIL PROTECTED] Visit R.A.'s Old Mac (mostly) Stuff @ http://tinyurl.com/ubkw -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
