Howdy...
Allot of dialog in just matter of a few hours, and I was not around for it, at least until just a bit ago. Though, I am going to step in here, and see if I can help with this. I seriously doubt that it is memory issue, though it COULD be a power supply issue IF the system has been struck by lightning, and uses an ATX power supply. I have seen this happen with ATX power supply units only. In regards to the application in question, is it a DOS, or Windows application? DOS applications could cause this, whereas Windows may not. The BSoD may not show up due to settings regarding STOP commands. I seem to recall you can have it either reboot when a BSoD is encountered, or dump. Though, I need to check, if you want to go this route. Richard Strickland, MCSE, MCP+I, MCP, CompTIA A+ ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
