Richard: BSoD ? Help me out there. I am sure that this is a windows application, not DOS and I would be interested in the settings regarding the reboot/stop. Understand that I am not on site with the machine and am working on trying to develop a strategy to attack this problem if the mem/power supply does not help.
Ralph ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, November 08, 2002 12:58 AM Subject: RE: PCWorks: Application Prog Causes Reboot of W-2000 > Howdy... > > > Allot of dialog in just matter of a few hours, and I was not around for it, > at least until just a bit ago. Though, I am going to step in here, and see > if I can help with this. > > I seriously doubt that it is memory issue, though it COULD be a power supply > issue IF the system has been struck by lightning, and uses an ATX power > supply. I have seen this happen with ATX power supply units only. > > In regards to the application in question, is it a DOS, or Windows > application? DOS applications could cause this, whereas Windows may not. > The BSoD may not show up due to settings regarding STOP commands. I seem to > recall you can have it either reboot when a BSoD is encountered, or dump. > Though, I need to check, if you want to go this route. > > > Richard Strickland, MCSE, MCP+I, MCP, CompTIA A+ ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
