Howdy...
In the interim, here is a resource link for support information:
http://msdn.microsoft.com
I have done some checking, and according to Microsoft, Windows 2000 is
automatically configured by default to reboot after a STOP occurs. In such
cases, the event would not be logged.
Now you have a bit more information, back off on being so agressive, as it
sounds like it may be a wasted effort.
Richard
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:owner-pcworks@;imagicomm.com]On
Behalf Of Ralph
Sent: Thursday, November 07, 2002 10:59 PM
To: [EMAIL PROTECTED]
Subject: PCWorks: Application Prog Causes Reboot of W-2000
Hi All:
I am working on a problem where an application causes Win 2000 to reboot.
The
reboot occurs just as if the reset button has been pressed on the processor.
The condition only occurs in the one application and does not cause Win 2000
to indicate an abnormal shutdown as it restarts and no errors are indicated.
The application log does not show any warnings or errors.
The hard drive was changed out and the applications all reinstalled..the
problem persisted. today I replaced the MB and CPU..same condition.
My question is:
How can I trap or identify the event that is causing the reboot ??
Any suggestions greatly appreciated !!!
Thanks
Ralph
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
