Thanks (again) Ron! I ended up using dish soap and a toothbrush to get most of it removed, but I'll try the WD-40 method. My main concern was that the arms that move with the tonearm didn't move easily at all, but I think the hot water I was using melted away a good bit of the gunk that was making it so stiff. After a thorough drying, I oiled all the moving parts with 3-in-one, then rubbed an oily paper towel over all of it to guard against any kind of moisture left over.
Anyone know about the factory varnish situation? I know it's probably a bit involved, but what am I (considering) getting into, exactly? Thanks, Robert On Jan 11, 2019, at 9:11 AM, Ron L'Herault via Phono-L <firstname.lastname@example.org<mailto:email@example.com>> wrote: You only need to remove old oil from the joints and hand crud from the finish. I’d use (have used) WD040 and a toothbrush to clean the mechanism and spray cleaner like Fantastic to clean the gold. Do not use polish. Relubricate moving parts with light oil. Put oil on the pad to avoid squeal. Ron
_______________________________________________ Phono-L mailing list http://phono-l.org Unsubscribe: phono-l-unsubscr...@oldcrank.org