Good to here that your issue is solved Ken.
Yeah you have to watch that Gerber round off with 2.3 data format
these days. It is becoming more and more of an issue with smaller parts,
tracks and off-grid routing. Many years ago I ran into this for the first
time, since then I adapted the standard rule of using 2.4 data, someday
possibly I will see the need for 2.5 data on soft PCBs before I retire.
Brad Velander,
Lead PCB Designer,
Norsat International Inc.,
#300 - 4401 Still Creek Dr.,
Burnaby, B.C., V5C 6G9.
Tel. (604) 292-9089 direct
Fax (604) 292-9010
website www.norsat.com
> -----Original Message-----
> From: Ken Pelic [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, September 05, 2001 1:22 PM
> To: Protel EDA Forum
> Subject: Re: [PEDA] Gerber clearance violations not found by
> Protel DRC
>
>
> We re-generated using 2.4 format and our gerbers now match
> our Protel PCB.
> Thanks to all for your feedback, especially to Rob and Brad V!
>
> Ken Pelic
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
