At 01:21 PM 11/14/01 -0800, Peter Bennett wrote:

>My .txt drill files use trailing zero suppression - if yours are the
>same format (and I don't recall anyplace in Protel to set the drill
>format), and the Gerber viewer is expecting leading zero suppression,
>this would put most holes down in the bottom left of the workspace -
>only holes requiring three digits after the decimal would be where they
>belong.

The setting is part of the CAM Outputs for... setup for drill files, 
likewise it is a gerber option.

When I want a drill file to be easy for a human to read, I set it for no 
zero suppression.

[EMAIL PROTECTED]
Abdulrahman Lomax
Easthampton, Massachusetts USA


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

Reply via email to